Block 12 V 1 Output Pin PCB Transformer, VDE 0570 part 2-1, ENEC 10 (VDE), DIN EN 61558-2-1, C-UL-US, DIN EN 61558-2-6,
- N° de stock RS:
- 732-0288
- Référence fabricant:
- VB 0,35/1/12
- Fabricant:
- Block
Indisponible
RS n'aura plus ce produit en stock.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
9,27 €
(TVA exclue)
11,22 €
(TVA incluse)
- N° de stock RS:
- 732-0288
- Référence fabricant:
- VB 0,35/1/12
- Fabricant:
- Block
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Block | |
| Secondary Voltage | 12 V | |
| Product Type | PCB Transformer | |
| Primary Voltage | 230 V | |
| Number of Outputs | 1 | |
| Length | 22mm | |
| Width | 22.7 mm | |
| Power | 0.35VA | |
| Depth | 15mm | |
| Weight | 0.02kg | |
| Mount Type | Pin | |
| Isolation Voltage | 5000V | |
| Maximum Operating Temperature | 70°C | |
| Efficiency | 30% | |
| Minimum Operating Frequency | 50Hz | |
| Series | VB 0.35/1/12 | |
| Maximum Operating Frequency | 60Hz | |
| Standards/Approvals | VDE 0570 part 2-1, ENEC 10 (VDE), DIN EN 61558-2-1, C-UL-US, DIN EN 61558-2-6, IEC 61558-2-1, IEC 61558-2-6, VDE 0570 Part 2-6 | |
| Sélectionner tout | ||
|---|---|---|
Marque Block | ||
Secondary Voltage 12 V | ||
Product Type PCB Transformer | ||
Primary Voltage 230 V | ||
Number of Outputs 1 | ||
Length 22mm | ||
Width 22.7 mm | ||
Power 0.35VA | ||
Depth 15mm | ||
Weight 0.02kg | ||
Mount Type Pin | ||
Isolation Voltage 5000V | ||
Maximum Operating Temperature 70°C | ||
Efficiency 30% | ||
Minimum Operating Frequency 50Hz | ||
Series VB 0.35/1/12 | ||
Maximum Operating Frequency 60Hz | ||
Standards/Approvals VDE 0570 part 2-1, ENEC 10 (VDE), DIN EN 61558-2-1, C-UL-US, DIN EN 61558-2-6, IEC 61558-2-1, IEC 61558-2-6, VDE 0570 Part 2-6 | ||
- Pays d'origine :
- DE
Transformers PCB Mount, Short Circuit Proof, VB & PT Series
230Va.c. 50 to 60Hz primary
Single or twin secondary windings for series or parallel connection (For conformance reasons,0.35 to 3.2VA transformers with 2 x 15 and 2 x 18V outputs and all transformers with 2x 24V outputs should not have their secondaries connected in series as this means they will not meet the VDE 0550 approval)
VB series (0.35 - 3.2VA) are inherently short circuit proof
PT series (4.5 - 22VA) are protected by internal PTC device
Compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
High efficiency and low temperature rise
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure boarding mounting on 4.5VA and above
Approvals
ENEC 10; UL recognised component
Standards
EN 61558