Block 15 V ac 2 Output Through Hole PCB Transformer, VDE, UL 22 VA
- N° de stock RS:
- 201-8738
- Référence fabricant:
- PT 22/2/15
- Fabricant:
- Block
Sous-total (1 unité)*
43,85 €
(TVA exclue)
53,06 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 43,85 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 201-8738
- Référence fabricant:
- PT 22/2/15
- Fabricant:
- Block
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Block | |
| Product Type | PCB Transformer | |
| Secondary Voltage | 15 V ac | |
| Primary Voltage | 230 V ac | |
| Number of Outputs | 2 | |
| Length | 64mm | |
| Width | 46 mm | |
| Power | 22VA | |
| Depth | 54mm | |
| Weight | 565g | |
| Mount Type | Through Hole | |
| Winding Type | Dual Secondary, Single Primary | |
| Efficiency | 83% | |
| Maximum Operating Temperature | 40°C | |
| Minimum Operating Frequency | 50Hz | |
| Standards/Approvals | VDE, UL | |
| Maximum Operating Frequency | 60Hz | |
| Sélectionner tout | ||
|---|---|---|
Marque Block | ||
Product Type PCB Transformer | ||
Secondary Voltage 15 V ac | ||
Primary Voltage 230 V ac | ||
Number of Outputs 2 | ||
Length 64mm | ||
Width 46 mm | ||
Power 22VA | ||
Depth 54mm | ||
Weight 565g | ||
Mount Type Through Hole | ||
Winding Type Dual Secondary, Single Primary | ||
Efficiency 83% | ||
Maximum Operating Temperature 40°C | ||
Minimum Operating Frequency 50Hz | ||
Standards/Approvals VDE, UL | ||
Maximum Operating Frequency 60Hz | ||
- Pays d'origine :
- DE

Transformers PCB Mount, Short Circuit Proof, VB & PT Series
230Va.c. 50 to 60Hz primary
Single or twin secondary windings for series or parallel connection (For conformance reasons,0.35 to 3.2VA transformers with 2 x 15 and 2 x 18V outputs and all transformers with 2x 24V outputs should not have their secondaries connected in series as this means they will not meet the VDE 0550 approval)
VB series (0.35 - 3.2VA) are inherently short circuit proof
PT series (4.5 - 22VA) are protected by internal PTC device
Compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
High efficiency and low temperature rise
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure boarding mounting on 4.5VA and above
Approvals
ENEC 10; UL recognised component
Standards
EN 61558
Liens connexes
- Block 12 V ac 2 Output Through Hole PCB Transformer UL 22 VA
- Block 18 V ac 2 Output Through Hole PCB Transformer UL 22 VA
- Block 15 V ac 2 Output Through Hole PCB Transformer UL 7.5 VA
- Block 15 V ac 2 Output Through Hole PCB Transformer VDE 13 VA
- Block 2 x 15 V 2 Output Pin PCB Transformer ENEC 10 (VDE) 30 VA
- Block 15 V ac 2 Output Through Hole PCB Transformer VDE 0.35 VA
- Block 15 V ac 2 Output Through Hole PCB Transformer UL 0.5 VA
- Block 15 V ac 2 Output Through Hole PCB Transformer VDE 36 VA
