Block 9V ac 2 Output Through Hole PCB Transformer, 7.5VA
- N° de stock RS:
- 201-8542
- Référence fabricant:
- PT 7.5/2/9
- Fabricant:
- Block
Offre groupée disponible
Sous-total (1 unité)*
17,70 €
(TVA exclue)
21,42 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 64 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 17,70 € |
| 10 - 49 | 14,51 € |
| 50 - 99 | 13,29 € |
| 100 - 199 | 12,37 € |
| 200 + | 11,72 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 201-8542
- Référence fabricant:
- PT 7.5/2/9
- Fabricant:
- Block
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Block | |
| Secondary Voltage Rating | 9V ac | |
| Power Rating | 7.5VA | |
| Primary Voltage Rating | 230V ac | |
| Number of Outputs | 2 | |
| Length | 51mm | |
| Width | 36mm | |
| Depth | 43mm | |
| Dimensions | 51 x 36 x 43mm | |
| Weight | 280g | |
| Mounting Type | Through Hole | |
| Maximum Temperature | +40°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Block | ||
Secondary Voltage Rating 9V ac | ||
Power Rating 7.5VA | ||
Primary Voltage Rating 230V ac | ||
Number of Outputs 2 | ||
Length 51mm | ||
Width 36mm | ||
Depth 43mm | ||
Dimensions 51 x 36 x 43mm | ||
Weight 280g | ||
Mounting Type Through Hole | ||
Maximum Temperature +40°C | ||
- Pays d'origine :
- DE
Transformers PCB Mount, Short Circuit Proof, VB & PT Series
230Va.c. 50 to 60Hz primary
Single or twin secondary windings for series or parallel connection (For conformance reasons,0.35 to 3.2VA transformers with 2 x 15 and 2 x 18V outputs and all transformers with 2x 24V outputs should not have their secondaries connected in series as this means they will not meet the VDE 0550 approval)
VB series (0.35 - 3.2VA) are inherently short circuit proof
PT series (4.5 - 22VA) are protected by internal PTC device
Compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
High efficiency and low temperature rise
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure boarding mounting on 4.5VA and above
Single or twin secondary windings for series or parallel connection (For conformance reasons,0.35 to 3.2VA transformers with 2 x 15 and 2 x 18V outputs and all transformers with 2x 24V outputs should not have their secondaries connected in series as this means they will not meet the VDE 0550 approval)
VB series (0.35 - 3.2VA) are inherently short circuit proof
PT series (4.5 - 22VA) are protected by internal PTC device
Compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
High efficiency and low temperature rise
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure boarding mounting on 4.5VA and above
Standards
EN 61558
Approvals
ENEC 10; UL recognised component
Liens connexes
- Block 6V ac 2 Output Through Hole PCB Transformer, 7.5VA
- Block 24V ac 2 Output Through Hole PCB Transformer, 7.5VA
- Block 18V ac 2 Output Through Hole PCB Transformer, 7.5VA
- Block 15V ac 2 Output Through Hole PCB Transformer, 7.5VA
- Block 8V ac 2 Output Through Hole PCB Transformer, 7.5VA
- Block 12V ac 2 Output Through Hole PCB Transformer, 7.5VA
- Block 9V ac 2 Output Through Hole PCB Transformer, 4.5VA
- Block 9V ac 2 Output Through Hole PCB Transformer, 2.3VA
