Block 24 V ac 2 Output Through Hole PCB Transformer, UL, VDE 18 VA
- N° de stock RS:
- 201-7296
- Référence fabricant:
- FL 18/24
- Fabricant:
- Block
Sous-total (1 unité)*
33,12 €
(TVA exclue)
40,08 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 40 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 33,12 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 201-7296
- Référence fabricant:
- FL 18/24
- Fabricant:
- Block
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Block | |
| Product Type | PCB Transformer | |
| Secondary Voltage | 24 V ac | |
| Primary Voltage | 115 V, 230 V ac | |
| Number of Outputs | 2 | |
| Length | 68mm | |
| Width | 27.6 mm | |
| Depth | 57mm | |
| Power | 18VA | |
| Weight | 375g | |
| Mount Type | Through Hole | |
| Winding Type | Dual Secondary, Dual Primary | |
| Minimum Operating Temperature | 40°C | |
| Efficiency | 77% | |
| Maximum Operating Temperature | 40°C | |
| Minimum Operating Frequency | 50Hz | |
| Maximum Operating Frequency | 60Hz | |
| Standards/Approvals | UL, VDE | |
| Sélectionner tout | ||
|---|---|---|
Marque Block | ||
Product Type PCB Transformer | ||
Secondary Voltage 24 V ac | ||
Primary Voltage 115 V, 230 V ac | ||
Number of Outputs 2 | ||
Length 68mm | ||
Width 27.6 mm | ||
Depth 57mm | ||
Power 18VA | ||
Weight 375g | ||
Mount Type Through Hole | ||
Winding Type Dual Secondary, Dual Primary | ||
Minimum Operating Temperature 40°C | ||
Efficiency 77% | ||
Maximum Operating Temperature 40°C | ||
Minimum Operating Frequency 50Hz | ||
Maximum Operating Frequency 60Hz | ||
Standards/Approvals UL, VDE | ||
- Pays d'origine :
- DE
PCB Mounting Low Profile 115 / 230Vac Primary
Twin 115Va.c. 50 to 60Hz primary windings for series or parallel connection
Twin secondary windings for series or parallel connection
Low profile compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure board mounting
Standard: EN60742, VDE 0551, IEC 61558
Note
Transformer with 2 x 24V outputs are not VDE, SEV approved.
Approvals
UL
Standards
VD 61 558
Liens connexes
- Block 18V ac 2 Output Through Hole PCB Transformer, 18VA
- Block 8V ac 2 Output Through Hole PCB Transformer, 18VA
- Block 12V ac 2 Output Through Hole PCB Transformer, 18VA
- Block 15V ac 2 Output Through Hole PCB Transformer, 18VA
- Block 9V ac 2 Output Through Hole PCB Transformer, 18VA
- Block 6V ac 2 Output Through Hole PCB Transformer, 18VA
- Block 24V ac 2 Output Through Hole PCB Transformer, 24VA
- Myrra 24V ac 2 Output Through Hole PCB Transformer, 18VA