Block 9V ac 2 Output Through Hole PCB Transformer, 4VA
- N° de stock RS:
- 201-6940
- Référence fabricant:
- FL 4/9
- Fabricant:
- Block
Offre groupée disponible
Sous-total (1 unité)*
13,15 €
(TVA exclue)
15,91 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 230 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 13,15 € |
| 10 - 24 | 11,97 € |
| 25 - 49 | 11,37 € |
| 50 - 99 | 10,80 € |
| 100 + | 10,25 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 201-6940
- Référence fabricant:
- FL 4/9
- Fabricant:
- Block
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Block | |
| Secondary Voltage Rating | 9V ac | |
| Power Rating | 4VA | |
| Primary Voltage Rating | 115V ac, 230V ac | |
| Number of Outputs | 2 | |
| Length | 53mm | |
| Width | 19.6mm | |
| Depth | 44mm | |
| Dimensions | 53 x 19.6 x 44mm | |
| Weight | 145g | |
| Mounting Type | Through Hole | |
| Maximum Temperature | +40°C | |
| Minimum Operating Frequency | 50Hz | |
| Maximum Operating Frequency | 60Hz | |
| Sélectionner tout | ||
|---|---|---|
Marque Block | ||
Secondary Voltage Rating 9V ac | ||
Power Rating 4VA | ||
Primary Voltage Rating 115V ac, 230V ac | ||
Number of Outputs 2 | ||
Length 53mm | ||
Width 19.6mm | ||
Depth 44mm | ||
Dimensions 53 x 19.6 x 44mm | ||
Weight 145g | ||
Mounting Type Through Hole | ||
Maximum Temperature +40°C | ||
Minimum Operating Frequency 50Hz | ||
Maximum Operating Frequency 60Hz | ||
- Pays d'origine :
- DE
PCB Mounting Low Profile 115 / 230Vac Primary
Twin 115Va.c. 50 to 60Hz primary windings for series or parallel connection
Twin secondary windings for series or parallel connection
Low profile compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure board mounting
Standard: EN60742, VDE 0551, IEC 61558
Twin secondary windings for series or parallel connection
Low profile compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure board mounting
Standard: EN60742, VDE 0551, IEC 61558
Note
Transformer with 2 x 24V outputs are not VDE, SEV approved.
Standards
VD 61 558
Approvals
VDE; UL
Standards
VD 61 558
Liens connexes
- Block 24V ac 2 Output Through Hole PCB Transformer, 4VA
- Block 6V ac 2 Output Through Hole PCB Transformer, 4VA
- Block 18V ac 2 Output Through Hole PCB Transformer, 4VA
- Block 12V ac 2 Output Through Hole PCB Transformer, 4VA
- Block 15V ac 2 Output Through Hole PCB Transformer, 4VA
- Block 8V ac 2 Output Through Hole PCB Transformer, 4VA
- Myrra 9V ac 2 Output Through Hole PCB Transformer, 4VA
- Block 9V ac 2 Output Through Hole PCB Transformer, 18VA
