Hirose DH Series Right Angle Surface PCB Socket, 17-Contact, 2 Row, 1 mm Pitch Solder
- N° de stock RS:
- 764-4581
- Référence fabricant:
- DH60-17P
- Fabricant:
- Hirose
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 764-4581
- Référence fabricant:
- DH60-17P
- Fabricant:
- Hirose
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Hirose | |
| Number of Contacts | 17 | |
| Product Type | PCB Socket | |
| Sub Type | Wire-to-Board | |
| Number of Rows | 2 | |
| Pitch | 1mm | |
| Current | 500mA | |
| Housing Material | Polyamide | |
| Termination Type | Solder | |
| Mount Type | Surface | |
| Orientation | Right Angle | |
| Connector System | Data | |
| Voltage | 125V | |
| Series | DH | |
| Minimum Operating Temperature | -25°C | |
| Contact Gender | Female | |
| Maximum Operating Temperature | 85°C | |
| Contact Material | Copper | |
| Contact Plating | Gold | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Hirose | ||
Number of Contacts 17 | ||
Product Type PCB Socket | ||
Sub Type Wire-to-Board | ||
Number of Rows 2 | ||
Pitch 1mm | ||
Current 500mA | ||
Housing Material Polyamide | ||
Termination Type Solder | ||
Mount Type Surface | ||
Orientation Right Angle | ||
Connector System Data | ||
Voltage 125V | ||
Series DH | ||
Minimum Operating Temperature -25°C | ||
Contact Gender Female | ||
Maximum Operating Temperature 85°C | ||
Contact Material Copper | ||
Contact Plating Gold | ||
Standards/Approvals No | ||
- Pays d'origine :
- JP
DH Series Receptacle Connector, Screw Lock Type
The DH Series . These Hirose DH Series receptacle connectors are an impedance controlled interface connector for high speed transmission, these interface connectors are for use with the screw-lock type covers and are compact in design with 1mm contact mating pitch and have excellent EMI shielding.
Current rating 0.5A
Voltage rating 125 Vac
Operating temperature range -25 to +85°C
1000 operating cycles
Hirose DH Series Shielded High Speed Interface
DH Series is an impedance controlled interface connector for high speed transmission. It has a 1mm contact mating pitch. This, coupled with a 0.5mm mounting pitch, makes for a more compact, lower-profile, higher-density alternative to conventional half-pitch interface connectors. Depending on the cable, the DH Series caters for speeds up to 2.5Gb/s. Applications include enterprise networking, industrial, telecom and datacom.
• 50% reduction in mating face area because of smaller pitch sizes
• Robust, D-shaped interface design resists wrenching forces
• Receptacle's through-hole style metal fittings facilitate retention to PCB
• Unique contact arrangement for IDC termination
• Excellent shielding for EMI prevention
Liens connexes
- Hirose DH Series Right Angle Surface PCB Socket 2 Row, 29.2 mm Pitch Screw
- Hirose DH Series Right Angle Surface PCB Socket 2 Row, 24.2 mm Pitch Solder
- Hirose Metal Clamp for use with DH Series
- Hirose 35 Series Right Angle PCB Socket 1 Row, 0.8 mm Pitch Solder
- Hirose FX23 Series Right Angle PCB PCB Socket 2 Row, 0.5 mm Pitch Solder
- Hirose FX22 Series Right Angle PCB PCB Socket 2 Row, 0.5 mm Pitch Solder
- Hirose FX15 Series Right Angle Surface PCB Socket 1 Row, 0.5 mm Pitch Solder
- Hirose DF19 Series Right Angle Surface PCB Socket 1 Row, 1 mm Pitch Solder