Samtec UPS Series Vertical Through Hole PCB Socket, 2-Contact, 1 Row, 3.81 mm Pitch Solder
- N° de stock RS:
- 229-5192
- Référence fabricant:
- UPS-02-07.0-01-L-V
- Fabricant:
- Samtec
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 229-5192
- Référence fabricant:
- UPS-02-07.0-01-L-V
- Fabricant:
- Samtec
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Samtec | |
| Number of Contacts | 2 | |
| Product Type | PCB Socket | |
| Number of Rows | 1 | |
| Sub Type | Socket | |
| Current | 20A | |
| Pitch | 3.81mm | |
| Housing Material | Liquid Crystal Polymer | |
| Termination Type | Solder | |
| Mount Type | Through Hole | |
| Orientation | Vertical | |
| Connector System | Board-to-Board | |
| Voltage | 620V | |
| Series | UPS | |
| Minimum Operating Temperature | -55°C | |
| Row Pitch | 3.81mm | |
| Maximum Operating Temperature | 125°C | |
| Contact Gender | Female | |
| Contact Plating | Phosphor Bronze | |
| Contact Material | Beryllium Copper Alloy | |
| Standards/Approvals | RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Samtec | ||
Number of Contacts 2 | ||
Product Type PCB Socket | ||
Number of Rows 1 | ||
Sub Type Socket | ||
Current 20A | ||
Pitch 3.81mm | ||
Housing Material Liquid Crystal Polymer | ||
Termination Type Solder | ||
Mount Type Through Hole | ||
Orientation Vertical | ||
Connector System Board-to-Board | ||
Voltage 620V | ||
Series UPS | ||
Minimum Operating Temperature -55°C | ||
Row Pitch 3.81mm | ||
Maximum Operating Temperature 125°C | ||
Contact Gender Female | ||
Contact Plating Phosphor Bronze | ||
Contact Material Beryllium Copper Alloy | ||
Standards/Approvals RoHS | ||
The Samtec dual blade power terminal strip has optional press fit tails.
Selectively loading contacts achieves customer specific creep age and clearance requirements