Dialight 555-2001F Red Right Angle PCB LED Indicator, 1 LEDs 5 mm (T-1 3/4) 2 V
- N° de stock RS:
- 173-2207
- Référence fabricant:
- 555-2001F
- Fabricant:
- Dialight
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 173-2207
- Référence fabricant:
- 555-2001F
- Fabricant:
- Dialight
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dialight | |
| Product Type | PCB LED Indicator | |
| LED Colour | Red | |
| Sub Type | Circuit Board Indicator | |
| Number of LEDs | 1 | |
| Maximum Forward Current | 30mA | |
| Number of Pins | 2 | |
| Viewing Angle | 40 ° | |
| Minimum Supply Voltage | 2V | |
| LED Orientation | Right Angle | |
| LED Material | GaAsP, GaP | |
| Multicolour/Single Colour | Single Colour | |
| Luminous Intensity | 1.2mcd | |
| Length | 6.22mm | |
| Standards/Approvals | IEC 825-1, EN-60825-1 | |
| Lens Colour | Red | |
| LED Size | 5 mm (T-1 3/4) | |
| Lens Finish | Diffused | |
| Power Dissipation | 80mW | |
| Sélectionner tout | ||
|---|---|---|
Marque Dialight | ||
Product Type PCB LED Indicator | ||
LED Colour Red | ||
Sub Type Circuit Board Indicator | ||
Number of LEDs 1 | ||
Maximum Forward Current 30mA | ||
Number of Pins 2 | ||
Viewing Angle 40 ° | ||
Minimum Supply Voltage 2V | ||
LED Orientation Right Angle | ||
LED Material GaAsP, GaP | ||
Multicolour/Single Colour Single Colour | ||
Luminous Intensity 1.2mcd | ||
Length 6.22mm | ||
Standards/Approvals IEC 825-1, EN-60825-1 | ||
Lens Colour Red | ||
LED Size 5 mm (T-1 3/4) | ||
Lens Finish Diffused | ||
Power Dissipation 80mW | ||
Dialight 555-2 Series LED CBI® Circuit Board Indicators
The 555-2xxx series, from Dialight, are PCB LED indicators from their CBI® circuit board indicator family. They contain one 2mm (T-3/4) LED in a black plastic housing. The housing positions the LED at a right angle to the PCB. The 555-2xxx is available in general purpose and integral resistor LED options.
Features of the 555-2xxx PCB LED indicators:
Through-hole mounting
1 x 2mm (T-3/4) LED
Black plastic housing
Right angle
Variety of colours
High contrast between LED and housing
Compatible with 555-4xxx Quad Block