Références fabricant

Molex QF-50 Series Straight Through Hole PCB Header, 14 Contact(s), 2.54 mm Pitch, 2 Row, Shrouded

N° de stock RS:: 670-6209
Référence fabricant:: 90571-1141
Fabricant:: Molex

Molex QF-50 Series Straight Through Hole PCB Header, 14 Contact(s), 2.54 mm Pitch, 2 Row, Shrouded

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

N° de stock RS:: 670-6209
Référence fabricant:: 90571-1141
Fabricant:: Molex

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Molex
	Series	QF-50
	Product Type	PCB Header
	Pitch	2.54mm
	Current	1A
	Housing Material	Polyester
	Number of Contacts	14
	Number of Rows	2
	Orientation	Straight
	Shrouded/Unshrouded	Shrouded
	Mount Type	Through Hole
	Connector System	Wire-to-Board
	Contact Material	Brass
	Contact Plating	Gold
	Termination Type	Solder
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	85°C
	Contact Gender	Male
	Standards/Approvals	No
	Voltage	250 V

	Sélectionner tout
	Marque Molex
	Series QF-50
	Product Type PCB Header
	Pitch 2.54mm
	Current 1A
	Housing Material Polyester
	Number of Contacts 14
	Number of Rows 2
	Orientation Straight
	Shrouded/Unshrouded Shrouded
	Mount Type Through Hole
	Connector System Wire-to-Board
	Contact Material Brass
	Contact Plating Gold
	Termination Type Solder
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 85°C
	Contact Gender Male
	Standards/Approvals No
	Voltage 250 V

Pays d'origine :: IE

Vertical Housings, 90571 Series

Headers fully shrouded to protect pins

Nickel + Tin and Gold Plating

Through-hole

QF-50 Range

1.27 mm (.050") IDT Wire-to-Board Ribbon Cable system.
Complies with DIN 41651, MIL-C-83503 keying, HE-10.
Fully intermateable / interchangeable with C-Grid III range.

Note

Molex Part Numbers: 90571-1xxx with ejectors.
Molex Part Numbers: 90571-2xxx no ejectors.
Molex Part Numbers: 90571-xxx1 have 0.1 μm Gold plating on Contact area and Tin plating on Solder area.
Molex Part Numbers: 90571-xxx3 have 0.25 μm Gold plating on Contact area and Tin plating on Solder area.

Molex QF-50 Series Straight Through Hole PCB Header, 14 Contact(s), 2.54 mm Pitch, 2 Row, Shrouded

Vertical Housings, 90571 Series

QF-50 Range

1.27 mm (.050") IDT Wire-to-Board Ribbon Cable system.Complies with DIN 41651, MIL-C-83503 keying, HE-10.Fully intermateable / interchangeable with C-Grid III range.

Note

Liens connexes

1.27 mm (.050") IDT Wire-to-Board Ribbon Cable system.
Complies with DIN 41651, MIL-C-83503 keying, HE-10.
Fully intermateable / interchangeable with C-Grid III range.