Molex Micro-Fit 3.0 Series Right Angle Through Hole PCB Header, 6 Contact(s), 3 mm Pitch, 2 Row, Shrouded

N° de stock RS:: 233-2961
Référence fabricant:: 43045-0600
Fabricant:: Molex

Molex Micro-Fit 3.0 Series Right Angle Through Hole PCB Header, 6 Contact(s), 3 mm Pitch, 2 Row, Shrouded

Offre groupée disponible

Sous-total (1 paquet de 5 unités)*

12,66 €

(TVA exclue)

15,32 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 75,00 €

En stock

75 unité(s) prête(s) à être expédiée(s)
Plus 460 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	le paquet*
5 - 95	2,532 €	12,66 €
100 - 370	1,80 €	9,00 €
375 - 1495	1,728 €	8,64 €
1500 - 2995	1,304 €	6,52 €
3000 +	1,25 €	6,25 €

*Prix donné à titre indicatif

N° de stock RS:: 233-2961
Référence fabricant:: 43045-0600
Fabricant:: Molex

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Molex
	Product Type	PCB Header
	Series	Micro-Fit 3.0
	Pitch	3mm
	Current	8.5A
	Housing Material	Thermoplastic
	Number of Contacts	6
	Number of Rows	2
	Orientation	Right Angle
	Shrouded/Unshrouded	Shrouded
	Connector System	Wire-to-Board
	Mount Type	Through Hole
	Contact Material	Brass
	Contact Plating	Tin
	Row Pitch	3mm
	Termination Type	Solder
	Minimum Operating Temperature	-40°C
	Contact Gender	Male
	Maximum Operating Temperature	105°C
	Standards/Approvals	No
	Mating Pin Length	3mm
	Voltage	250 V
	Distrelec Product Id	304-40-668

	Sélectionner tout
	Marque Molex
	Product Type PCB Header
	Series Micro-Fit 3.0
	Pitch 3mm
	Current 8.5A
	Housing Material Thermoplastic
	Number of Contacts 6
	Number of Rows 2
	Orientation Right Angle
	Shrouded/Unshrouded Shrouded
	Connector System Wire-to-Board
	Mount Type Through Hole
	Contact Material Brass
	Contact Plating Tin
	Row Pitch 3mm
	Termination Type Solder
	Minimum Operating Temperature -40°C
	Contact Gender Male
	Maximum Operating Temperature 105°C
	Standards/Approvals No
	Mating Pin Length 3mm
	Voltage 250 V
	Distrelec Product Id 304-40-668

Se connecter pour voir les modèles CAO

Molex Right-Angle PCB Header, 6 Way, 2 Rows - Micro-Fit 3.0 Series - 43045-0600

This right-angle printed circuit board header from Molex is a wire-to-board solder electrical connector that lets you make multiple connections using a single block. The unit has a standard 3mm pitch and carries up to 5A of current for low-range to mid-range power distribution. Positive latching via a locking ramp on the housing ensures secure mating and prevents accidental disconnection. Fully-isolated contacts reduce arcing, so you don't have to worry about the risk of electric shocks or fire.

• Glow wire compliance ensures safety related to risks like over-currents or short circuits

• Fully isolated dual-beam terminals for reliable electrical performance and contact

• Wide operating temperatures ranging from -40°C to +105°C for use in harsh conditions

• Tin contacts for efficient conductivity and reliable application performance

Applications

• Medical devices

• Automotive components

• Safety and security equipment

• Entertainment consoles and centres

What's the benefit of a fully-shrouded PCB header?

When a PCB header is shrouded like this one, it means it's encased in a plastic housing. This casing makes the product robust as it protects the internal contacts. It also provides insulation against short-circuits that can cause component damage.

Molex Micro-Fit 3.0 3.0mm Dual Row PCB Headers with Snap in Plastic Peg PCB Lock, 43045 Series

Micro-Fit 3.0 3mm pitch wire to board dual row PCB headers which form part of a compact power connector system providing a low to mid-range power distribution solution. With the ability to carry up to 5A of current, Micro-Fit 3.0 connectors have one of the highest current carrying abilities in the smallest footprints available. These Micro-Fit 3.0 PCB headers incorporate positive latching in the form of a locking ramp on the housing for secure mating and to prevent accidental disconnection. The housings are made of high-temperature UL 94V-0 Liquid Crystal Polymer that can withstand temperatures of up to 265°C during the IR reflow soldering process. The through hole mounting versions of these Micro-Fit 3.0 headers are also SMT compatible which means a reduction in process requirements and costs. To secure these Micro-Fit 3.0 headers to the PCB board, snap-in plastic peg PCB locks are incorporated into the connector design. The contacts of these Micro-Fit 3.0 headers are fully isolated within the housings to reduce arcing. Tin or a choice of two thicknesses of gold contact platings are available to keep down costs

Features and Benefits

• High current carrying capacity in a small footprint

• High temperature housings for IR reflow soldering

• Through hole versions SMT compatible

• Positive latching for secure mating connection

• Fully isolated dual beam terminals for reliable electrical performance and contact

• Plastic peg PCB locks for secure connection to PCB

• Glow Wire Compliant

Product Application Information

These Micro-Fit 3.0 header connectors are suitable for use in a wide range of low to mid power applications including the following:

Military COTS (Commercial Off The Shelf)

Solar power

Consumer products (dryers, freezers, fridges, washing machines)

Data communications (routers, servers)

Medical

Telecommunications

Gaming terminals