Molex Micro-Fit 3.0 Series Right Angle Through Hole PCB Header, 8 Contact(s), 3 mm Pitch, 2 Row, Shrouded

N° de stock RS:: 189-1439
Référence fabricant:: 43045-0800
Fabricant:: Molex

Molex Micro-Fit 3.0 Series Right Angle Through Hole PCB Header, 8 Contact(s), 3 mm Pitch, 2 Row, Shrouded

Visuel non contractuel

Sous-total (1 boîte de 1440 unités)*

2 240,64 €

(TVA exclue)

2 711,52 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

Expédition à partir du 28 septembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
1440 +	1,556 €	2 240,64 €

*Prix donné à titre indicatif

N° de stock RS:: 189-1439
Référence fabricant:: 43045-0800
Fabricant:: Molex

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Molex
	Product Type	PCB Header
	Series	Micro-Fit 3.0
	Pitch	3mm
	Current	5A
	Housing Material	Thermoplastic
	Number of Contacts	8
	Number of Rows	2
	Orientation	Right Angle
	Shrouded/Unshrouded	Shrouded
	Mount Type	Through Hole
	Connector System	Wire-to-Board
	Contact Material	Brass
	Contact Plating	Tin
	Termination Type	Solder
	Row Pitch	3mm
	Minimum Operating Temperature	-40°C
	Contact Gender	Male
	Maximum Operating Temperature	105°C
	Standards/Approvals	No
	Mating Pin Length	3mm
	Voltage	250V

	Sélectionner tout
	Marque Molex
	Product Type PCB Header
	Series Micro-Fit 3.0
	Pitch 3mm
	Current 5A
	Housing Material Thermoplastic
	Number of Contacts 8
	Number of Rows 2
	Orientation Right Angle
	Shrouded/Unshrouded Shrouded
	Mount Type Through Hole
	Connector System Wire-to-Board
	Contact Material Brass
	Contact Plating Tin
	Termination Type Solder
	Row Pitch 3mm
	Minimum Operating Temperature -40°C
	Contact Gender Male
	Maximum Operating Temperature 105°C
	Standards/Approvals No
	Mating Pin Length 3mm
	Voltage 250V

Datasheet 43045-0800

Se connecter pour voir les modèles CAO

Molex PCB Header, 5A Current Rating, 250V Voltage Rating - Micro-Fit 3.0 Series - 43045-0800

Make wiring to a circuit board a walk in the park with this PCB header from Molex. It acts as a transmission link between your circuit and connected cables, keeping live parts under cover to boost user safety. Versatility and space efficiency are covered by its two-row, eight-contact design, which gives you multi-circuit control. Thanks to through-hole mounting, this unit latches firmly onto your board, making it the right choice for vibrating systems.

Features & Benefits

• Current rating of 5A makes it suitable for use in light-duty applications

• High-temperature thermoplastic housing withstands the heat and impact that come with harsh industrial settings

• Right-angle orientation for easy connection in tight setups

Applications

• Process and packaging equipment

• HVAC systems

• Industrial lighting

Is this header shrouded?

Yes. This unit is fully shrouded to keep EMI at bay and ensure you get the best signal quality.

Molex Micro-Fit 3.0 3.0mm Dual Row PCB Headers with Snap in Plastic Peg PCB Lock, 43045 Series

Micro-Fit 3.0 3mm pitch wire to board dual row PCB headers which form part of a compact power connector system providing a low to mid-range power distribution solution. With the ability to carry up to 5A of current, Micro-Fit 3.0 connectors have one of the highest current carrying abilities in the smallest footprints available. These Micro-Fit 3.0 PCB headers incorporate positive latching in the form of a locking ramp on the housing for secure mating and to prevent accidental disconnection. The housings are made of high-temperature UL 94V-0 Liquid Crystal Polymer that can withstand temperatures of up to 265°C during the IR reflow soldering process. The through hole mounting versions of these Micro-Fit 3.0 headers are also SMT compatible which means a reduction in process requirements and costs. To secure these Micro-Fit 3.0 headers to the PCB board, snap-in plastic peg PCB locks are incorporated into the connector design. The contacts of these Micro-Fit 3.0 headers are fully isolated within the housings to reduce arcing. Tin or a choice of two thicknesses of gold contact platings are available to keep down costs

Features and Benefits

• High current carrying capacity in a small footprint

• High temperature housings for IR reflow soldering

• Through hole versions SMT compatible

• Positive latching for secure mating connection

• Fully isolated dual beam terminals for reliable electrical performance and contact

• Plastic peg PCB locks for secure connection to PCB

• Glow Wire Compliant

Product Application Information

These Micro-Fit 3.0 header connectors are suitable for use in a wide range of low to mid power applications including the following:

Military COTS (Commercial Off The Shelf)

Solar power

Consumer products (dryers, freezers, fridges, washing machines)

Data communications (routers, servers)

Medical

Telecommunications

Gaming terminals