Rohde & Schwarz RTB2000 Series, 200 MHz Bench 4-Channel, RSCAL

N° de stock RS:: 143-9358
Référence fabricant:: RTB2K-204M
Fabricant:: Rohde & Schwarz

Rohde & Schwarz RTB2000 Series, 200 MHz Bench 4-Channel, RSCAL

Informations sur le stock actuellement non accessibles

Produit de remplacement

Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:

Rohde & Schwarz RTB2002 RTB2000 Series, 200MHz Bench Oscilloscope, 2 Analogue Channels, 16 Digital Channels - RS

N° de stock RS: 143-9680

la pièce

3 878,50 €

(TVA exclue)

4 692,98 €

(TVA incluse)

N° de stock RS:: 143-9358
Référence fabricant:: RTB2K-204M
Fabricant:: Rohde & Schwarz

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Rohde & Schwarz
	Bandwidth	200MHz
	Number of Channels	4
	Oscilloscope Type	Bench
	Interface Type	CAN, IIC, LIN, RS232, RS422, RS485, SPI, UART, USB
	Series	RTB2000
	Length	390mm
	Height	220mm
	Standards/Approvals	No
	Width	152mm
	Power Source	Mains, Mains
	Minimum Time Base	1ns/div
	Maximum Time Base	500s/div
	Vertical Resolution	10 bit, 16 (High Resolution Decimation Mode) bit
	Minimum Vertical Sensitivity	1mV/div
	Calibrated	RSCAL
	Maximum Vertical Sensitivity	5V/div
	Rise Time	5ns

	Sélectionner tout
	Marque Rohde & Schwarz
	Bandwidth 200MHz
	Number of Channels 4
	Oscilloscope Type Bench
	Interface Type CAN, IIC, LIN, RS232, RS422, RS485, SPI, UART, USB
	Series RTB2000
	Length 390mm
	Height 220mm
	Standards/Approvals No
	Width 152mm
	Power Source Mains, Mains
	Minimum Time Base 1ns/div
	Maximum Time Base 500s/div
	Vertical Resolution 10 bit, 16 (High Resolution Decimation Mode) bit
	Minimum Vertical Sensitivity 1mV/div
	Calibrated RSCAL
	Maximum Vertical Sensitivity 5V/div
	Rise Time 5ns

Datasheet

Pays d'origine :: CZ

Rohde & Schwarz RTB2000 Digital Oscilloscopes

The Rhode & Schwarz RTB2000 series digital oscilloscopes offer the Power of ten: 10-bit ADC, 10 Msample memory and 10.1 inch colour touchscreen. These features ombined with smart operating concepts make the R&S®RTB2000 series the perfect tools for university laboratories, for troubleshooting embedded designs during development and for production and service departments.;This series of oscilloscopes offer the largest (10.1 inch) capacitive touch display with the highest resolution of 1280 x 800 pixel in its class. The touch screen allows quick navigation in pop-up menus, easily adjust scaling, zoom in or to move a waveform and even annotate the display and take screenshots. It works just like your smartphone touch screen.;The R&S®RTB2000 series give users more than just an oscilloscope. It also includes a logic analyser, protocol analyser, waveform and pattern generator and digital voltmeter. Dedicated operating modes for frequency analysis, mask tests and long data acquisitions are also integrated. Debugging all kinds of electronic systems is easy and efficient.

Features

10 bit vertical resolution

1 mV/div: full measurement bandwidth and low noise

10Msample standard and 20 Msample interleaved

Segmented memory: 160 Msample with history

10.1 inch high resolution capacitive touch screen with gesture support

On-screen annotation function by using your finger with screen-shot capture

Fast access to important tools

Education mode disables automatic functions for more manual control

Multilingual support;Mixed signal operation option (model dependant, also any oscilloacope can be upgraded to MSO with the RTB-B1 MSO option (RS 143-9334)

Oscilloscope Choice:

143-9311 RTB2002, 70 MHz, 2ch;143-9312 RTB2002, 70MHz, 2ch, MSO;143-9313 RTB2004, 70 MHz, 4ch;143-9315 RTB2004, 70 MHz, 4ch, MSO;143-9316 RTB2002, 100 MHz, 2ch;143-9317 RTB2004, 100 MHz, 2ch, MSO;143-9318 RTB2004, 100 MHz, 4ch;143-9319 RTB2004,100 MHz,4ch, MSO;143-9321 RTB2002, 200 MHz, 2ch;143-9322 RTB2002, 200 MHz, 2ch, MSO;143-9323 RTB2004, 200 MHz, 4ch;143-9324 RTB2004, 200 MHz, 4ch, MSO;143-9325 RTB2002, 300 MHz, 2ch;143-9326 RTB2002, 300 MHz, 2ch, MSO;143-9327 RTB2004, 300 MHz, 4ch;143-9328 RTB2004, 300 MHz, 4ch, MSO

Growth Potential

The Rohde & Schwarz RTB2000 oscilloscopes can be adapted by the installation of software updates. These updates apply to triggering and decoding of serial protocols and the history and segmented memory mode. The waveform and pattern generator and the MSO capabilities (model dependent, see below) are built-in and just need to be activated. The bandwidth can be upgraded up to 300MHz making functional retrofitting very easy.

Bandwidth Upgrades:

143-9336 RTB-B221 Upgrade 100 MHz for RTB2002

143-9337 RTB-B222 Upgrade 200 MHz for RTB2002

143-9338 RTB-B223 Upgrade 300 MHz for RTB2002

143-9339 RTB-B241 Upgrade 100 MHz for RTB2004

143-9340 RTB-B242 Upgrade 200 MHz for RTB2004

143-9341 RTB-B243 Upgrade 300 MHz for RTB2004

Trigger and Decode

143-9329 RTB-K1 I2C/SPI Trigger & Decode

143-9330 RTB-K2 UART/RS232 Trigger & Decode

143-9331 RTB-K3 CAN/LIN Trigger & Decode

History and Segmented Memory

143-9332 RTB-K15 History & Segmented Memory

Software Option Bundle

143-9333 RTB-PK1 Software Option Bundle

Mixed Signal Option

143-9334 RTB-B1 Mixed Signal Option

Function Generator

143-9335 RTB-B6 Function Generator

Front Cover and Carry Case

143-9342 RTB-Z1 Front Cover;143-9343 RTB-Z3 Carrying Case