PicoScope 3000E Series, 3418E, 500 MHz PC Based Digital Oscilloscope, 4 Channels

Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
N° de stock RS:
665-684
Référence fabricant:
PQ349
Fabricant:
Pico Technology
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Pico Technology

Product Type

Digital Oscilloscope

Bandwidth

500MHz

Number of Channels

4

Model Number

3418E

Oscilloscope Type

PC Based

Oscilloscope Form

Pc Based

Interface Type

USB Type C

Series

PicoScope 3000E

Width

173mm

Height

30mm

Depth

221mm

Standards/Approvals

REACH, RoHS, WEEE

Maximum Time Base

5000s/div

Waveform Refresh Rate

300000wfms/s

Rise Time

925ps

Maximum Vertical Sensitivity

4V/div

Minimum Time Base

1ns/div

Power Source

USB

Vertical Resolution

8, 10 bit

Plug Type

USB

Minimum Vertical Sensitivity

1mV/div

Pays d'origine :
GB

PicoScope 3000E Series Digital Oscilloscope, 500MHz Bandwidth, 4 Channels - PQ349


This digital oscilloscope connects to a host PC via USB Type-C and is powered through the same Interface to capture and analyse electrical signals. It offers high-frequency signal observation with Rapid waveform acquisition and is intended for use in laboratory, development and troubleshooting environments where compact, PC-based measurement is required.

Features and Benefits:


• 500MHz bandwidth enables detailed high-frequency signal inspection
• 300000wfms/s refresh captures rare transient events quickly
• 10‑bit 8‑bit vertical resolution improves amplitude measurement fidelity
• 1ns/div to 5000s/div timebase supports very fast to very slow signals
• 925ps rise time reveals fast edge characteristics accurately

Applications


• Suitable for debugging high-speed digital circuits
• Ideal for power-supply ripple and transient analysis
• Used with multi-channel sensor arrays for synchronised capture
• Can be used for mixed-signal timing verification
• Used for long-duration signal monitoring and logging

How is the device powered during operation?


It draws power directly from the host via the USB Type-C connection.

What channel count is available for simultaneous measurements?


There are four independent input channels for concurrent signal capture.

What sensitivity range does the front end provide?


The vertical sensitivity spans from 1mV/div up to 4V/div for a wide dynamic range.

Which standards does the product comply with?


It meets REACH, RoHS and WEEE environmental standards.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.