Testec 8000 Series TT-SI 8051 Oscilloscope Probe, Differential Type, 100 MHz, 1:50 / 1:500, BNC Connector
- N° de stock RS:
- 238-7385
- Numéro d'article Distrelec:
- 302-52-707
- Référence fabricant:
- TT-SI 8051
- Fabricant:
- Testec
Sous-total (1 unité)*
1 119,64 €
(TVA exclue)
1 354,76 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 5 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1 119,64 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 238-7385
- Numéro d'article Distrelec:
- 302-52-707
- Référence fabricant:
- TT-SI 8051
- Fabricant:
- Testec
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Testec | |
| Probe Type | Differential | |
| Product Type | Oscilloscope Probe | |
| Attenuation | 1:50 / 1:500 | |
| Bandwidth | 100MHz | |
| Maximum Common Mode Input Voltage | 1500V ac/dc | |
| Connector Type | BNC | |
| Model Number | TT-SI 8051 | |
| Number of Probes | 1 | |
| Safety Category Level | IEC61010-031:2015 | |
| Series | 8000 | |
| Standards/Approvals | RoHS | |
| Rise Time | 5ns | |
| Sélectionner tout | ||
|---|---|---|
Marque Testec | ||
Probe Type Differential | ||
Product Type Oscilloscope Probe | ||
Attenuation 1:50 / 1:500 | ||
Bandwidth 100MHz | ||
Maximum Common Mode Input Voltage 1500V ac/dc | ||
Connector Type BNC | ||
Model Number TT-SI 8051 | ||
Number of Probes 1 | ||
Safety Category Level IEC61010-031:2015 | ||
Series 8000 | ||
Standards/Approvals RoHS | ||
Rise Time 5ns | ||
- Pays d'origine :
- CN
TT-SI 8051
active differential probe
The Testec active differential probe TT-SI 8051 allows safe and accurate high voltage measurements between two voltage points, none being connected to ground. This probe is designed for a variety of measurements with up to 100MHz / ±1500V and compatible with grounded oscilloscopes (1MOhm input) of all common manufacturers. The probe can be powered with the supplied USB cable and the AC adapter.
The probe is supplied in a hardcase with extensive accessories and factory calibration certificate.
Bandwidth: 100MHz
Rise time: 3,5ns
Attenuation ratio: x50 / x500
DC accuracy: ±2%
Maximum input voltage:
Differential mode: ±150V (DC + AC Peak) @ x50
±1500V (DC + AC Peak) @ x500
Common mode: ±1500V (DC + Peak AC)
Each side to ground: 600Vrms CAT III / 1000Vrms CAT II
Safety standard: IEC61010-031: 2015
Scope of delivery:
1 x probe series 8000
1 x hardcase
2 x test leads with insulated banana plug 4mm (red & black)
2 x hook clips (red & black)
2 x pincer hook clip (red & black)
2 x crocodile clips (red & black)
1 x insulated BNC test lead 100cm
1 x USB power cord
1 x power adapter EU version
1 x factory calibration certificate
1 x user manual
Liens connexes
- Testec 8000 Series TT-SI 8071 Oscilloscope Probe 70 MHz BNC Connector
- Testec 8000 Series TT-SI 8050 Oscilloscope Probe 70 MHz BNC Connector
- Testec 8000 Series TT-SI 8052 Oscilloscope Probe 200 MHz BNC Connector
- Testec 8000 Series TT-SI 8010B Oscilloscope Probe 100 MHz BNC Connector
- Testec 8000 Series TT-SI 8110 Oscilloscope Probe 100 MHz BNC Connector
- Testec 8000 Series TT-SI 8010A Oscilloscope Probe 70 MHz BNC Connector
- Testec TT-SX 200 Series Oscilloscope Probe 200 MHz BNC Female Connector
- Testec TT-SX 9000 Series TT-SX 9002 Oscilloscope Probe 30 MHz 1:200, BNC Connector
