Tektronix ADA400A Differential Preamplifier Oscilloscope Module for Use with TDS400 Series, TDS5000 Series, TDS600
- N° de stock RS:
- 349-8214
- Référence fabricant:
- ADA400A
- Fabricant:
- Tektronix
Sous-total (1 unité)*
3 898,60 €
(TVA exclue)
4 717,31 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 unité(s) expédiée(s) à partir du 08 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 3 898,60 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 349-8214
- Référence fabricant:
- ADA400A
- Fabricant:
- Tektronix
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Tektronix | |
| Module Type | Differential Preamplifier | |
| Product Type | Oscilloscope Module | |
| For Use With | TDS400 Series, TDS5000 Series, TDS600 Series, TDS500 Series, TDS7000 Series, TDS700 Series | |
| Model Number | ADA400A | |
| Standards/Approvals | CE, ISO 14001, ISO 9001 | |
| Sélectionner tout | ||
|---|---|---|
Marque Tektronix | ||
Module Type Differential Preamplifier | ||
Product Type Oscilloscope Module | ||
For Use With TDS400 Series, TDS5000 Series, TDS600 Series, TDS500 Series, TDS7000 Series, TDS700 Series | ||
Model Number ADA400A | ||
Standards/Approvals CE, ISO 14001, ISO 9001 | ||
Statut RoHS : Exempté
- Pays d'origine :
- US
Tektronix ADA400A 1 MHz Differential Preamplifier
10μV/div Sensitivity
Low Pass filters for 100Hz, 3kHz, 100Hz and Full (1 MHz)
Typically 100 dB CMRR DC to 10 kHz
Selectable Gain: 100, 10, 1 or 0.1
Accurately measures signal as small as 5uV
Integral Probe Power with TEKPROBE ™ BNC
The ADA400A Active Differential Preamplifier allows direct oscilloscope measurements of very low amplitude voltages and signals which are not ground referenced. The high impedance of both inputs eliminates the need to add additional ground points in the DUT, thereby avoiding circulating currents which disturb the measurement or the circuit.
The high gain and extremely high common mode rejection provide usable measurements of voltages as low as 5μV, even in high noise environments. Selectable bandwidth limiting reduces normal mode noise from digital logic, switch mode power supplies and line frequency sources. Adjustable differential offset allows the user to null out transducer bridge bias and galvanic potential from the test set-up. An "infinite impedance" mode can be selected in the two highest gain ranges allowing accurate measurements of signals with high source impedance. It is specifically designed to operate on Tektronix oscilloscopes with TEKPROBE® interface.
Tektronix ADA400A 1 MHz Differential Preamplifier
The ADA400A Active Differential Preamplifier allows direct oscilloscope measurements of very low amplitude voltages and signals which are not ground referenced. The high impedance of both inputs eliminates the need to add additional ground points in the DUT, thereby avoiding circulating currents which disturb the measurement or the circuit.,The high gain and extremely high common mode rejection provide usable measurements of voltages as low as 5μV, even in high noise environments. Selectable bandwidth limiting reduces normal mode noise from digital logic, switch mode power supplies and line frequency sources. Adjustable differential offset allows the user to null out transducer bridge bias and galvanic potential from the test set-up. An "infinite impedance" mode can be selected in the two highest gain ranges allowing accurate measurements of signals with high source impedance. It is specifically designed to operate on Tektronix oscilloscopes with TEKPROBE® interface
10μV/div Sensitivity
Low-pass filter: 100Hz, 3kHz, 100Hz or Full (1 MHz)
Typically 100 dB CMRR DC to 10 kHz
Selectable Gain: 100, 10, 1 or 0.1
Accurately measures signal as small as 5uV
Integral Probe Power with TEKPROBE™BNC
Liens connexes
- Tektronix TDP Series TDP1000 Oscilloscope Probe 1 GHz
- Tektronix P6247 Oscilloscope Probe 1 GHz, BNC Connector
- Tektronix TMD Series TMDP0200 Oscilloscope Probe 200 MHz, BNC Connector
- Tektronix P6251 Oscilloscope Probe 1 GHz BNC Connector
- Tektronix TDP Series TDP0500 Oscilloscope Probe 500 MHz, BNC Connector
- Tektronix THD Series THDP0200 Oscilloscope Probe 200 MHz, BNC Connector
- Tektronix THD Series THDP0100 Oscilloscope Probe 100 MHz, BNC Connector
- Tektronix P6248 Oscilloscope Probe 1.5 GHz BNC Connector