Pico Technology,Differential Oscilloscope Kit High-Resolution Differential Oscilloscope, Ta271 Single Ended D9-Bnc
- N° de stock RS:
- 136-5309
- Numéro d'article Distrelec:
- 300-85-386
- Référence fabricant:
- PicoScope 4444 1000 V CAT III kit
- Fabricant:
- Pico Technology
Sous-total (1 unité)*
2 096,05 €
(TVA exclue)
2 536,22 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s)
- Plus 4 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 2 unité(s) expédiée(s) à partir du 22 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 2 096,05 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 136-5309
- Numéro d'article Distrelec:
- 300-85-386
- Référence fabricant:
- PicoScope 4444 1000 V CAT III kit
- Fabricant:
- Pico Technology
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Pico Technology | |
| Model Number | PQ074 | |
| Product Type | Oscilloscope Kit | |
| For Use With | PicoScope 4444 Differential Oscilloscope | |
| Kit Type | Differential Oscilloscope Kit | |
| Kit Contents | High-Resolution Differential Oscilloscope, Ta271 Single Ended D9-Bnc Adapter, Picoconnect 442 1000 V Cat Iii Passive Differential Voltage Probes X 3 | |
| Height | 40mm | |
| Length | 190mm | |
| Width | 170mm | |
| Standards/Approvals | EN 610101:2010, FCC Part 15 Subpart B, EN 613261:2013 | |
| Sélectionner tout | ||
|---|---|---|
Marque Pico Technology | ||
Model Number PQ074 | ||
Product Type Oscilloscope Kit | ||
For Use With PicoScope 4444 Differential Oscilloscope | ||
Kit Type Differential Oscilloscope Kit | ||
Kit Contents High-Resolution Differential Oscilloscope, Ta271 Single Ended D9-Bnc Adapter, Picoconnect 442 1000 V Cat Iii Passive Differential Voltage Probes X 3 | ||
Height 40mm | ||
Length 190mm | ||
Width 170mm | ||
Standards/Approvals EN 610101:2010, FCC Part 15 Subpart B, EN 613261:2013 | ||
Pico Technology Differential Oscilloscope Kit
The Pico Technology PICOSCOPE 4444 1000 V CAT III Kit is a 20Mhz high-resolution differential oscilloscope with three passive differential voltage probes and one TA271 single-ended D9-BNC adaptor. Its intelligent probe interface automatically configures the PicoScope display to probes. The four D9 inputs allow you to make true differential measurements. The 12bit resolution of the PicoScope 4444 offers 16 times as much vertical detail.
The PicoScope 4444 uses specially designed passive voltage probes that have smaller and lighter (or no) interface boxes. The PicoScope 4444 has high-resolution and deep memory and lets you make multiple differential measurements at the same time, while never occupying more than one power socket. Its intelligent probe interface automatically configures the PicoScope display to your probes, so you don’t have to.
Features and Benefits
It has 4 channel device
waveform buffer and navigator Hardware acceleration engine (HAL3)
Deep memory is 256 MS
Up to 400 MS/s sampling rate
High common-mode rejection ratio
Flexible 12 and 14bit resolution
Balanced high-impedance inputs for a low circuit load
Low voltage probe for millivolts to 50V
True differential measurements in high-resolution
FFT spectrum analyser
Intelligent probe interface
High-resolution offers 64x more detail
Applications
Non-ground referenced measurements
Safe probing of single phase and 3-phase voltages and currents
Measuring power drawn by mobile and IoT devices
Hybrid and electric vehicle design
Motor drives and inverters
Certifications
EN 61010-1:2010
EN 61326-1:2013
FCC Part 15 Subpart B
Liens connexes
- Pico Technology Picoconnect 441 1:1 Passive
- Pico Technology TA271 Oscilloscope Coaxial Cable, Model TA271
- Pico Technology TA327 Unshrouded 4 mm Sprung Hook Sprung Hook, For Use With PicoScope 4444 Differential Oscilloscope
- Pico Technology TA328 Unshrouded 4 mm Sprung Hook Sprung Hook, For Use With PicoScope 4444 Differential Oscilloscope
- Pico Technology Carrying Case for Use with PicoScope 4444 Differential Oscilloscope length 420 mm 300mm
- Pico Technology PicoScope 4000 Series, 20 MHz PC Based Oscilloscope 4-Channel
- Pico Technology PicoScope 4000 Series RSCAL
- Pico Technology PicoScope 4000 Series UKAS