Broadcom DC Input Optocoupler, Surface, 4-Pin SOIC
- N° de stock RS:
- 818-8246P
- Référence fabricant:
- ACPL-217-50BE
- Fabricant:
- Broadcom
Bénéficiez d'une remise sur les achats en gros
Ajoutez 760 de plus pour économiser 11,40 €
Consulter les options de prix de grosSous-total 160 unités (conditionné en bobine)*
44,32 €
(TVA exclue)
53,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 14 920 unité(s) expédiée(s) à partir du 11 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Économie |
|---|---|---|
| 160 - 740 | 0,277 € | - |
| 760 - 1480 | 0,262 € | 11,40 € |
| 1500 + | 0,209 € | 102,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 818-8246P
- Référence fabricant:
- ACPL-217-50BE
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Mount Type | Surface | |
| Product Type | Optocoupler | |
| Output Type | Transistor | |
| Maximum Forward Voltage | 1.4V | |
| Number of Channels | 1 | |
| Packaging | Tape & Reel | |
| Number of Pins | 4 | |
| Package Type | SOIC | |
| Input Current Type | DC | |
| Typical Rise Time | 2μs | |
| Maximum Input Current | 5mA | |
| Isolation Voltage | 3000Vrms | |
| Minimum Operating Temperature | -55°C | |
| Maximum Current Transfer Ratio | 260% | |
| Maximum Operating Temperature | 110°C | |
| Standards/Approvals | EN, UL, IEC | |
| Typical Fall Time | 3μs | |
| Minimum Current Transfer Ratio | 50% | |
| Series | ACPL | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Mount Type Surface | ||
Product Type Optocoupler | ||
Output Type Transistor | ||
Maximum Forward Voltage 1.4V | ||
Number of Channels 1 | ||
Packaging Tape & Reel | ||
Number of Pins 4 | ||
Package Type SOIC | ||
Input Current Type DC | ||
Typical Rise Time 2μs | ||
Maximum Input Current 5mA | ||
Isolation Voltage 3000Vrms | ||
Minimum Operating Temperature -55°C | ||
Maximum Current Transfer Ratio 260% | ||
Maximum Operating Temperature 110°C | ||
Standards/Approvals EN, UL, IEC | ||
Typical Fall Time 3μs | ||
Minimum Current Transfer Ratio 50% | ||
Series ACPL | ||
Automotive Standard No | ||
Broadcom ACPL Series Optocoupler, 3000Vrms Isolation Voltage, 50% Minimum Current Transfer Ratio - ACPL-217-50BE
This optocoupler provides electrical isolation between input and output for DC control signals on PCB assemblies. Housed in an SOIC surface-mount package and supplied on tape and reel, it is intended for single-channel signal transfer where high-voltage isolation and Compact board mounting are required. The device operates across a wide temperature span and conforms to recognised international safety standards.
Features and Benefits:
• 3000Vrms isolation delivers safe separation of circuits
• DC input supports low-current control applications
• 50-260% current transfer ratio enables varied gain conditions
• 2μs rise and 3μs fall times suit fast signalling
• 5mA maximum input current reduces drive requirements
• -55°C to 110°C operating range tolerates harsh environments
• DC input supports low-current control applications
• 50-260% current transfer ratio enables varied gain conditions
• 2μs rise and 3μs fall times suit fast signalling
• 5mA maximum input current reduces drive requirements
• -55°C to 110°C operating range tolerates harsh environments
Applications
• Suitable for PCB-mount SOIC signal isolation tasks
• Used with low-voltage control logic Interfaces
• Ideal for surface-mount industrial sensor input separation
• Can be used for isolated communication line buffering
• Used for protected Interface circuits in power subsystems
• Used with low-voltage control logic Interfaces
• Ideal for surface-mount industrial sensor input separation
• Can be used for isolated communication line buffering
• Used for protected Interface circuits in power subsystems
What is the maximum input drive allowed?
The input should not exceed 5mA to remain within specified limits.
Which temperature extremes can the device withstand?
It operates from -55°C up to 110°C without performance data change.
How is the component supplied for automated assembly?
It is packaged on tape and reel compatible with pick-and-place processes.
Which approvals cover its safety credentials?
It holds approvals to EN, UL and IEC standards.