Broadcom DC Input Optocoupler, Surface, 8-Pin DIP
- N° de stock RS:
- 215-5726P
- Référence fabricant:
- ACPL-782T-500E
- Fabricant:
- Broadcom
Offre groupée disponible
Consulter les options de prix de grosSous-total 10 unités (conditionné en bande continue)*
97,60 €
(TVA exclue)
118,10 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 862 unité(s) expédiée(s) à partir du 31 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 10 - 24 | 9,76 € |
| 25 - 99 | 9,32 € |
| 100 - 499 | 8,39 € |
| 500 + | 8,20 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 215-5726P
- Référence fabricant:
- ACPL-782T-500E
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Product Type | Optocoupler | |
| Mount Type | Surface | |
| Maximum Forward Voltage | 5.5V | |
| Number of Channels | 1 | |
| Packaging | Tape & Reel | |
| Number of Pins | 8 | |
| Package Type | DIP | |
| Input Current Type | DC | |
| Typical Rise Time | 2.96μs | |
| Maximum Input Current | 400mA | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | DIN EN 60747-5-2 UL CSA, IEC 60747-5-5 | |
| Typical Fall Time | 2.96μs | |
| Series | ACPL-782T | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Product Type Optocoupler | ||
Mount Type Surface | ||
Maximum Forward Voltage 5.5V | ||
Number of Channels 1 | ||
Packaging Tape & Reel | ||
Number of Pins 8 | ||
Package Type DIP | ||
Input Current Type DC | ||
Typical Rise Time 2.96μs | ||
Maximum Input Current 400mA | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals DIN EN 60747-5-2 UL CSA, IEC 60747-5-5 | ||
Typical Fall Time 2.96μs | ||
Series ACPL-782T | ||
Automotive Standard AEC-Q100 | ||
681
The Broadcom ACPL-782T automotive isolation amplifier family was designed for current sensing in electronic motor drives and battery system. In a typical implementation, motor currents or battery current flow through an external resistor and the resulting analog voltage drop is sensed by the ACPL-782T. A differential output voltage is created on the other side of the ACPL-782T optical isolation barrier. This differential output voltage is proportional to the motor current and can be converted to a single-ended signal by using an op-amp as shown in the recommended application circuit.
Automotive Operating Temperature -40 to 125°C
15 kV/μs Common-Mode Rejection at VCM = 1000V
Liens connexes
- Coral G950-06809-01 for use with Raspberry Pi
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series Transistor Output 2
- Carling Technologies Illuminated DPDT, On-(On) Rocker Switch Panel Mount
- SICK Encoder Collets for Use with DBS36E-BBxxxx
- Littelfuse Through Hole Gas Discharge Tube
- Igus GFM-0607-08 6mm Bore Plain Bearing, 7mm O.D
- Raspberry Pi QWERTY (Spain) Raspberry Pi Keyboard
- Coral Google Mini PCIe M.2 Accelerator B/M Development Kit G650-04686-01
