Broadcom HCNR201-500E DC Input 2-Channel Optocoupler, Surface Mount, 8-Pin DIP
- N° de stock RS:
- 174-3636
- Référence fabricant:
- HCNR201-500E
- Fabricant:
- Broadcom
Sous-total (1 bobine de 750 unités)*
1 992,75 €
(TVA exclue)
2 411,25 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 27 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 750 + | 2,657 € | 1 992,75 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 174-3636
- Référence fabricant:
- HCNR201-500E
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Mount Type | Surface Mount | |
| Product Type | Optocoupler | |
| Maximum Forward Voltage | 1.95V | |
| Number of Channels | 2 | |
| Packaging | Tape & Reel | |
| Number of Pins | 8 | |
| Package Type | DIP | |
| Input Current Type | DC | |
| Maximum Input Current | 25mA | |
| Isolation Voltage | 5kV | |
| Minimum Operating Temperature | -55°C | |
| Maximum Current Transfer Ratio | 0.72% | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | UL, CSA, IEC/EN/DIN EN 60747-5-5 | |
| Minimum Current Transfer Ratio | 0.36% | |
| Series | HCNR201 | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Mount Type Surface Mount | ||
Product Type Optocoupler | ||
Maximum Forward Voltage 1.95V | ||
Number of Channels 2 | ||
Packaging Tape & Reel | ||
Number of Pins 8 | ||
Package Type DIP | ||
Input Current Type DC | ||
Maximum Input Current 25mA | ||
Isolation Voltage 5kV | ||
Minimum Operating Temperature -55°C | ||
Maximum Current Transfer Ratio 0.72% | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals UL, CSA, IEC/EN/DIN EN 60747-5-5 | ||
Minimum Current Transfer Ratio 0.36% | ||
Series HCNR201 | ||
Automotive Standard No | ||
Broadcom Optocoupler
The Broadcom optocoupler is an HCNR201 high linearity analogue optocoupler. It consists of a high-performance AlGaAs LED that illuminates two closely matched photodiodes. The input photodiode can be used to monitor, and therefore, stabilize the light output of the LED. As a result, the non-linearity and drift characteristics of the LED can be virtually eliminated.
Features and Benefits
• 8 pin DIP package - 0.400in spacing
• Allows flexible circuit design
• Current transfer ratio is between 0.36% and 0.72%
• Low gain temperature coefficient is 65ppm/°C
• Low nonlinearity is 0.01%
• Maximum forward voltage is 1.95V
• Maximum input current is 25mA
• Wide bandwidth is DC to >1 MHz
Applications
• Industrial process control transducer isolator
• Isolator for thermocouples 4mA to 20 mA loop isolation
• Low cost analog isolation
• Medical
• Monitor motor supply voltage
• SMPS feedback loop, SMPS feedforward
• Telecom: modem, PBX
Certifications
• CSA approved
• IEC/EN/DIN EN 60747-5-2 approved
• UL1577 recognized
Liens connexes
- Broadcom DC Input 2-Channel Optocoupler 8-Pin DIP
- Broadcom HCNW3120-500E AC/DC Input Optocoupler 8-Pin DIP-8
- Broadcom ACNU-3410-500E DC Input Optocoupler 8-Pin DIP
- Broadcom ACPL-782T-500E DC Input Optocoupler 8-Pin DIP
- Broadcom HCNW2611-500E Optocoupler 8-Pin DIP
- Broadcom HCNR201-300E DC Input Optocoupler 8-Pin PDIP
- Broadcom Through Hole, 8-Pin DIP
- Broadcom DC Input Optocoupler 8-Pin DIP