Rhopoint A210-091 Handheld Ohmmeter, 100 μΩ, 4 Wire

Voir l’ensemble des Ohmmeters

Sous-total (1 unité)*

780,13 €

(TVA exclue)

943,96 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 24 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 2 unité(s) expédiée(s) à partir du 24 avril 2026
  • Plus 12 unité(s) expédiée(s) à partir du 04 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +780,13 €

*Prix donné à titre indicatif

N° de stock RS:
611-953
Référence fabricant:
M210
Fabricant:
Rhopoint
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Rhopoint

Product Type

Ohmmeter

Resistance Resolution

100μΩ

Measurement Type

4 Wire

Battery Type

PP3

Power Source

Battery

Handheld

Yes

Minimum Operating Temperature

5°C

Maximum Operating Temperature

35°C

Maximum Accuracy

0.1 %

Weight

510g

Width

38mm

Standards/Approvals

No

Length

80mm

Height

150mm

Model Number

A210-091

Minimum Accuracy

±0.1 %

Statut RoHS : Exempté

Pays d'origine :
GB

Rhopoint Digital Milliohm Meter


The Rhopoint digital milliohm meter is a portable, low resistance digital gauge designed to measure resistance between 1mohm and 200ohm. A high degree of accuracy is achieved by utilising a 4-terminal input to eliminate errors caused by test lead length. One of the most important features of the milliohm meter is its low test current rating of about 0.005A. This ensures the contact being tested is not harmed by the test current, which can happen when higher test currents are used that may lead to erroneous measurements.

Features and Benefits


Accuracy range is ±0.1%

Auto ranging (1.999ohm, 19.99ohm and 199.9ohm)

Auto switch OFF after 3 minutes

Continuous operation for 20 hours (from standard PP3 battery)

Fully calibrated and supplied with UKAS calibration certificate

Measurement increments of 0.001ohm, 0.01ohm and 0.1ohm

Single pushbutton operation

Supplied with a set of standard test leads with spring clip connectors

Applications


Aircraft bonding check

Earth conductor continuity

Network cabling

PCB (plated through-holes)

PCB (track resistance)

Relay, switch and connector contacts

RFI shielding and coil resistance

Ring circuit testing

Transformer and motor windings

Wire-wrapped and solder joints

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

Liens connexes