Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 425-0754
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Network Cable Tester | |
| Equipment Type | Cable Tester | |
| Connector Type | UTP | |
| Power Source | Battery | |
| Display Type | LCD | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 50°C | |
| Height | 38mm | |
| Standards/Approvals | CE | |
| Weight | 180g | |
| Length | 170mm | |
| Width | 52mm | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Network Cable Tester | ||
Equipment Type Cable Tester | ||
Connector Type UTP | ||
Power Source Battery | ||
Display Type LCD | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 50°C | ||
Height 38mm | ||
Standards/Approvals CE | ||
Weight 180g | ||
Length 170mm | ||
Width 52mm | ||
Statut RoHS : Exempté
- Pays d'origine :
- TW
TES-45
Easy to use slim-line, handheld LAN cabling verifier
Complete wire test mapping of unshielded twisted pair cable per EIA/TIA 568A
Test all 4 pairs
Checks 10Base-T and other 4 pair UTP cables for shorts, opens, crossed pairs, reversed pairs and split pairs
10Base 2 BNC wiring
Tests and identifies up to 4 cables with additional cable identifiers
Easy to read display indicates fault conditions
Green and red LED
Low battery indication
Can test a wide range of UTP cables such as 10Base T, 100Base Tx, 10Base 2 (Coax), 356A, TIA-568A, TIA-568B etc.
Checks for wiring faults such as open, short, reversed, crossed and split wires
Measures cables from 1.2m up to 150m