Références fabricant

RS PRO Network Tester RS232C, D-Sub

N° de stock RS:: 202-537
Fabricant:: RS PRO

Sous-total (1 unité)*

49,05 €

(TVA exclue)

59,35 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 17 unité(s) expédiée(s) à partir du 16 novembre 2026
Plus 714 unité(s) expédiée(s) à partir du 16 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	49,05 €

*Prix donné à titre indicatif

N° de stock RS:: 202-537
Fabricant:: RS PRO

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	RS PRO
	Equipment Type	Network Tester
	Product Type	Line Monitor
	Connector Type	RS232C, D-Sub
	Tone	Yes
	Display Type	LED Indicator
	Maximum Operating Temperature	60°C
	Length	53mm
	Standards/Approvals	No
	Width	53mm
	Height	16mm

	Sélectionner tout
	Marque RS PRO
	Equipment Type Network Tester
	Product Type Line Monitor
	Connector Type RS232C, D-Sub
	Tone Yes
	Display Type LED Indicator
	Maximum Operating Temperature 60°C
	Length 53mm
	Standards/Approvals No
	Width 53mm
	Height 16mm

Pays d'origine :: TW

RS Pro Mini RS-232 Monitor

This small and effortless RS-232 breakout box is a super simple way of monitoring RS-232C/V24 data traffic. The small adapter comes equipped with 9 LEDs that indicate the status of the transmission on the most significant lines. All that is required is to plug it in-line so this requires no connectors or software. All lines are wired pin to pin.

Features and benefits-

• Super easy to use, just plug and monitor.

• 18 Efficient LEDs to indicate errors. Red indicates +VE high and green indicates –VE low.

• All lines are wired pin to pin

• 500 mating cycles

• 30mA, 15 mΩ contact rating

• 25-way ’D’ connector M-F line installation

You can use this RS-232 breakout box to debug and solve interface problems. With it being so small and compact you can take it anywhere and test almost any cable you need. This would make a great use in an IT kitbag.

Make sure to plug the correct end of the RS-232 port onto the correct end of the DTE cable otherwise the lights will not correspond with the actual signals.

RS PRO

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Line Monitors

Line monitors designed for rapid checking and trouble shooting of computer interfaces especially EIA RS-232C (V24)

Conforms to RS-232 and discriminates against out of tolerance signals

The LEDs on the front panels of the testers are generally on the signal originating side of the unit, allowing the signal to be broken yet remain monitored

Separate RED and GREEN LEDs ensure unambiguous monitoring

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.