StarTech.com AF221CE-POE-INJECTOR Unmanaged 2 Port Network Switch Power Over Ethernet
- N° de stock RS:
- 473-412
- Référence fabricant:
- AF221CE-POE-INJECTOR
- Fabricant:
- StarTech.com
Sous-total (1 unité)*
148,48 €
(TVA exclue)
179,66 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 148,48 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 473-412
- Référence fabricant:
- AF221CE-POE-INJECTOR
- Fabricant:
- StarTech.com
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | StarTech.com | |
| Number of Ports | 2 | |
| Product Type | Network Switch | |
| Switch Type | Unmanaged | |
| Power Over Ethernet | Yes | |
| Network Speed | 1000Mbps | |
| Number of RJ-45 Ports | 4 | |
| Desktop/Rack Mount | Desktop | |
| Model Number | AF221CE-POE-INJECTOR | |
| Standards/Approvals | IEC 61000-4-2, IEEE 802.3u, IEEE 802.3i, IEEE 802.3at, IEEE 802.3af, IEEE 802.3ab | |
| Depth | 10.2cm | |
| Height | 1in | |
| Width | 1.8in | |
| Sélectionner tout | ||
|---|---|---|
Marque StarTech.com | ||
Number of Ports 2 | ||
Product Type Network Switch | ||
Switch Type Unmanaged | ||
Power Over Ethernet Yes | ||
Network Speed 1000Mbps | ||
Number of RJ-45 Ports 4 | ||
Desktop/Rack Mount Desktop | ||
Model Number AF221CE-POE-INJECTOR | ||
Standards/Approvals IEC 61000-4-2, IEEE 802.3u, IEEE 802.3i, IEEE 802.3at, IEEE 802.3af, IEEE 802.3ab | ||
Depth 10.2cm | ||
Height 1in | ||
Width 1.8in | ||
- Pays d'origine :
- CN
The StarTech.com 2-port multi-speed PoE+ injector serves as Power Sourcing Equipment (PSE) and enables Ethernet speeds of 10/100/1000Mbps. This mid-span inline injector can transmit network data and power up to 328ft (100m) for two Powered Devices (PD). Dual-port PoE injector supports the IEEE 802.3af and IEEE 802.3at PSE standards and delivers up to 30W output (52V/0.580A). Connect a remote PoE device to a network at a location where there is no power source, but an Ethernet cable already exists. This includes access points, IP cameras, VoIP phone systems, IPTV and access controls. The flexible design allows for either desktop or surface-mount use.
Surge protection up to 2 kilovolt
Wall mountable with front facing mounting ears and screw holes molded into the housing
Streamline deployment without additional software
Connect the PoE injector to the network switch or router and remote powered device via standard cabling
Four RJ45 ports two data input and two data output plus power
Compliant with IEEE 802.3af and IEEE 802.3at
9K jumbo frames
Dimensions 3.2 x 1 x 1.8 inch or 82 x 25 x 46 millimeter