FTDI Chip Multiprotocol Transceiver 20-Pin
- N° de stock RS:
- 923-1613
- Référence fabricant:
- FT231XQ-R
- Fabricant:
- FTDI Chip
Sous-total (1 bobine de 5000 unités)*
8 900,00 €
(TVA exclue)
10 750,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- 5 000 unité(s) expédiée(s) à partir du 04 novembre 2026
- Plus 5 000 unité(s) expédiée(s) à partir du 02 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 5000 + | 1,78 € | 8 900,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 923-1613
- Référence fabricant:
- FT231XQ-R
- Fabricant:
- FTDI Chip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FTDI Chip | |
| Product Type | Multiprotocol Transceiver | |
| Maximum Data Rate | 3Mbps | |
| Number of Transmitters | 1 | |
| Number of Receivers | 1 | |
| Number of Transceivers | 1 | |
| Mount Type | Surface | |
| Pin Count | 20 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 5.25V | |
| Minimum Operating Temperature | -40°C | |
| Interface Standards | USB 2.0 | |
| Maximum Operating Temperature | 85°C | |
| Series | FT231X | |
| Power Supply Type | USB | |
| Standards/Approvals | RoHS | |
| Supply Current | 8mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque FTDI Chip | ||
Product Type Multiprotocol Transceiver | ||
Maximum Data Rate 3Mbps | ||
Number of Transmitters 1 | ||
Number of Receivers 1 | ||
Number of Transceivers 1 | ||
Mount Type Surface | ||
Pin Count 20 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 5.25V | ||
Minimum Operating Temperature -40°C | ||
Interface Standards USB 2.0 | ||
Maximum Operating Temperature 85°C | ||
Series FT231X | ||
Power Supply Type USB | ||
Standards/Approvals RoHS | ||
Supply Current 8mA | ||
Automotive Standard No | ||
FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip
The FTDI Chip FT230X and FT234XD are Ful Speed USB to Basic serial UART Interface devices. The FT231X is a Full Speed USB to Full Handshake UART Interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.
- Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators.
- Configurable CBUS I/O Pin Options.
- Asynchronous and Synchronous Bit Bang Modes.
- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.
Liens connexes
- FTDI Chip Multiprotocol Transceiver 20-Pin, FT231XQ-R
- FTDI Chip Multiprotocol Transceiver 16-Pin QFN
- FTDI Chip Multiprotocol Transceiver 16-Pin QFN, FT230XQ-T
- FTDI Chip Multiprotocol Transceiver 48-Pin QFN
- FTDI Chip Multiprotocol Transceiver 28-Pin SSOP
- FTDI Chip Multiprotocol Transceiver 16-Pin SSOP
- FTDI Chip Multiprotocol Transceiver 48-Pin LQFP
- FTDI Chip Multiprotocol Transceiver 48-Pin LQFP, FT232HL-TRAY