FTDI Chip Multiprotocol Transceiver 16-Pin QFN
- N° de stock RS:
- 200-1778P
- Référence fabricant:
- FT230XQ-T
- Fabricant:
- FTDI Chip
Offre groupée disponible
Sous-total 24 unités (conditionné en plateau)*
50,52 €
(TVA exclue)
61,128 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- 964 unité(s) expédiée(s) à partir du 17 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 24 - 96 | 2,105 € |
| 100 - 248 | 2,023 € |
| 252 - 496 | 1,853 € |
| 500 + | 1,803 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 200-1778P
- Référence fabricant:
- FT230XQ-T
- Fabricant:
- FTDI Chip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FTDI Chip | |
| Maximum Data Rate | 3Mbps | |
| Product Type | Multiprotocol Transceiver | |
| Number of Transmitters | 1 | |
| Number of Receivers | 1 | |
| Number of Transceivers | 1 | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 16 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 5.25V | |
| Transmitter Signal Type | Ttl | |
| Receiver Signal Type | Ttl | |
| Minimum Operating Temperature | -40°C | |
| Interface Standards | RS232, RS422, TTL, USB 2.0, RS485 | |
| Maximum Operating Temperature | 85°C | |
| Power Supply Type | USB | |
| Standards/Approvals | RoHS, USB-IF Test-ID (TID) 40001463 (Rev D) | |
| Series | FT230X | |
| Supply Current | 8mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque FTDI Chip | ||
Maximum Data Rate 3Mbps | ||
Product Type Multiprotocol Transceiver | ||
Number of Transmitters 1 | ||
Number of Receivers 1 | ||
Number of Transceivers 1 | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 16 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 5.25V | ||
Transmitter Signal Type Ttl | ||
Receiver Signal Type Ttl | ||
Minimum Operating Temperature -40°C | ||
Interface Standards RS232, RS422, TTL, USB 2.0, RS485 | ||
Maximum Operating Temperature 85°C | ||
Power Supply Type USB | ||
Standards/Approvals RoHS, USB-IF Test-ID (TID) 40001463 (Rev D) | ||
Series FT230X | ||
Supply Current 8mA | ||
Automotive Standard No | ||
The FTDI Chips FT230XQ series is full speed USB to basic serial UART interface device. It has a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count. It has 16 pin QFN package.
Asynchronous and synchronous bit bang modes
Operates between +3.3V and +5.25V
Configurable I/O pin output drive strength of 4mA (min) and 16mA (max)