RS PRO Fused Test Lead Kit, CAT III, 500mA

Voir la catégorie

Sous-total (1 unité)*

58,63 €

(TVA exclue)

70,94 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 49 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 22 unité(s) expédiée(s) à partir du 10 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +58,63 €

*Prix donné à titre indicatif

N° de stock RS:
731-5273
Numéro d'article Distrelec:
303-91-156
Fabricant:
RS PRO
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

RS PRO

Lead Type

Test Lead Kit

Product Type

Multimeter Leads

Current

500mA

Connector Type

Spring Hook, Crocodile Clip, Right Angle Plug, Straight Plug

Fused

Yes

Lead Length

1.2m

Safety Category Voltage

600V

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

70°C

Safety Category Level

CAT III

Standards/Approvals

EC 1010, IEC 10101, and 2015/863

Pays d'origine :
GB

RS PRO Multimeter Lead Set in Pouch


RS PRO practical lead sets supplied in a durable grey pouch with attractive yellow piping. The standard set (731-5277) has a wide range of accessories for taking measurements in most situations. The fused set (731-5273) has extra fused test probes complying with the requirement of GS38 safety guidance for use on high energy circuits while taking voltage measurements. Both sets comply with IEC1010-1 cat III 600 V safety standard.

RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. 161-1530.

Contents Standard Set


2 x 1.2 m silicone multimeter leads with shrouded 4 mm terminations one end straight, one end right-angled, (red and black), 2 x crocodile clips (red and black), 2 x long reach multimeter probes fuse rating to 1000 V 600 mA (red and black), 2 x spring loaded, grabber multimeter probes (red and black).

Extra items in fused sets, 2 x fused probes with only 4 mm of exposed metal tip fitted with 1.25" ceramic fuses rated at 660 V 500 mA.

Also available:

Thin fine insulated prods set 262-7770 for use with fused test prods and multimeter test lead sets

Shuttered lantern probe set 262-7786 for use with fused test prods and multimeter test lead sets.

Typical applications

Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test.

Test and Measurement

Safety Precautions

Always inspect the test probes for cracks and frayed leads before each use. If defects are found, do not use the probe.

Warning

Burns, due to arcing or flashover resulting from the use of unsatisfactory test probes, account for more accidents in electrical testing than are caused by electric shock. Because of this, fused test leads with 2mm or less of exposed insulation are recommended for electrical use by the HSE in their guidance.

Standards

EC 1010 Cat III 600V; GS38

Liens connexes