ABB Soft Starter, , 1.5 kW, 208 → 600 V ac, 3 Phase, IP20
- N° de stock RS:
- 851-7629
- Référence fabricant:
- 1SFA896103R1100
- Fabricant:
- ABB
Visuel non contractuel
Sous-total (1 unité)*
124,48 €
(TVA exclue)
150,62 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 124,48 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 851-7629
- Référence fabricant:
- 1SFA896103R1100
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Power Rating | 1.5 kW | |
| Motor Starter Type | Soft Start | |
| Voltage Rating | 208 → 600 V ac | |
| Phase | 3 | |
| Current Rating | 3.9 A | |
| IP Rating | IP20 | |
| Overall Length | 45mm | |
| Overall Width | 114mm | |
| Overall Depth | 140mm | |
| Series | PSR | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Power Rating 1.5 kW | ||
Motor Starter Type Soft Start | ||
Voltage Rating 208 → 600 V ac | ||
Phase 3 | ||
Current Rating 3.9 A | ||
IP Rating IP20 | ||
Overall Length 45mm | ||
Overall Width 114mm | ||
Overall Depth 140mm | ||
Series PSR | ||
- Pays d'origine :
- CN
PSR - Compact Range Softstarter
The PSR range is the most compact of all ABB’s softstarter ranges. The compact PSR range makes it possible to fit many devices into the same enclosure.
The setup of the PSR is easily done and confirmed using the three clearly marked potentiometers on the front.
The built-in by-pass on all sizes does not only save energy; it will also ensure the most compact ABB’s softstarter design and reduce the installation time. Thanks to the reduced heat generation, the softstarter can be mounted inside high IP class enclosures.
The setup of the PSR is easily done and confirmed using the three clearly marked potentiometers on the front.
The built-in by-pass on all sizes does not only save energy; it will also ensure the most compact ABB’s softstarter design and reduce the installation time. Thanks to the reduced heat generation, the softstarter can be mounted inside high IP class enclosures.
Potentiometer settings
Run signal relay on all devices
Built-in by-pass for saving energy and reducing installation time
Sophisticated algorithm eliminating the DC-component and thereby providing excellent starting performance
DIN rail mounting for PSR3 to PSR45
Screw mounting on all sizes