RS PRO 1.6A, 2.4 A Motor Protection Circuit Breaker, 40 °C, -5 °C
- N° de stock RS:
- 331-3624
- Fabricant:
- RS PRO
Sous-total (1 unité)*
50,07 €
(TVA exclue)
60,58 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s)
- Plus 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 50,07 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 331-3624
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Current Rating | 1.6, 2.4A | |
| Product Type | Motor Protection Circuit Breaker | |
| Motor Protection Component | Circuit Breaker | |
| Motor Protection System | Motor Protection Circuit Breaker | |
| Series | RS PRO | |
| Sensing Type | Current | |
| Overall Length | 80mm | |
| Overall Width | 45mm | |
| Overall Depth | 73.5mm | |
| Minimum Operating Temperature | -5°C | |
| Maximum Operating Temperature | 40°C | |
| Standards/Approvals | RoHS, IEC 947-2, IEC 9474 | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Current Rating 1.6, 2.4A | ||
Product Type Motor Protection Circuit Breaker | ||
Motor Protection Component Circuit Breaker | ||
Motor Protection System Motor Protection Circuit Breaker | ||
Series RS PRO | ||
Sensing Type Current | ||
Overall Length 80mm | ||
Overall Width 45mm | ||
Overall Depth 73.5mm | ||
Minimum Operating Temperature -5°C | ||
Maximum Operating Temperature 40°C | ||
Standards/Approvals RoHS, IEC 947-2, IEC 9474 | ||
- Pays d'origine :
- SI
RS PRO 1.6 → 2.4 A Motor Protection Circuit Breaker
This RS PRO motor protection switch is a device used to protect against overloading or failure due to an external conductor. It monitors current consumption and acts as a circuit breaker when the current reaches a specific limit. You'll often find a protection switch used on small machines.
You can adapt this switch to the needs of your system as you can position it either horizontally or vertically using its screw termination. It's voltage rated at 690 V and automatically switches off at a high current using either thermal or magnetic release. It's capable of performing up to 40 circuit breaks per hour and can be reset.
Use this motor switch in industrial and building settings with equipment like chillers, heat pumps and cooling towers. Part of the RS PRO range, it's been stringently tested by leading engineers.
Features and Benefits
• Motor protection switch
• Current range of 1.6 A to 2.4 A
• Voltage rating of 690 V
• Length of 80 mm
• Width of 45 mm
• Depth of 73.5 mm
• For use with the MS25 series
• Screw terminal
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.