STMicroelectronics L99H02XPTR, DC Motor DC Motor Driver 36-Pin, PowerSSO-36
- N° de stock RS:
- 234-8880P
- Référence fabricant:
- L99H02XPTR
- Fabricant:
- STMicroelectronics
Offre groupée disponible
Consulter les options de prix de grosSous-total 10 unités (conditionné en bande continue)*
36,80 €
(TVA exclue)
44,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Dernier stock RS
- 1 000 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité |
|---|---|
| 10 - 98 | 3,68 € |
| 100 - 248 | 3,61 € |
| 250 - 498 | 3,54 € |
| 500 + | 3,46 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 234-8880P
- Référence fabricant:
- L99H02XPTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Motor Type | DC Motor | |
| Product Type | DC Motor Driver | |
| Configuration | H Bridge | |
| Mount Type | Surface | |
| Package Type | PowerSSO-36 | |
| Pin Count | 36 | |
| Output Current | 48mA | |
| Maximum Supply Voltage | 28V | |
| Minimum Supply Voltage | 6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Series | L99H02 | |
| Standards/Approvals | No | |
| Width | 10.5mm | |
| Height | 2.45mm | |
| Length | 10.5mm | |
| Supply Current | 18mA | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Motor Type DC Motor | ||
Product Type DC Motor Driver | ||
Configuration H Bridge | ||
Mount Type Surface | ||
Package Type PowerSSO-36 | ||
Pin Count 36 | ||
Output Current 48mA | ||
Maximum Supply Voltage 28V | ||
Minimum Supply Voltage 6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Series L99H02 | ||
Standards/Approvals No | ||
Width 10.5mm | ||
Height 2.45mm | ||
Length 10.5mm | ||
Supply Current 18mA | ||
Automotive Standard AEC-Q100 | ||
The STMicroelectronics driver is designed to drive 4 external N-channel MOS transistors in H-bridge configuration for DC-motor driving in automotive applications. A free configurable current sense amplifier is integrated. The integrated standard serial peripheral Interface (SPI) controls the device and provides diagnostic information. An Interface pin for the thermal sensors of the external MOSFETs is implemented.
AEC-Q100 qualified
Operating supply voltage 6 V to 28 V
Central 2-stage charge pump
100% duty cycle
Full RDSon down to 6 V (standard level threshold MOSFETs)
Charge pump output available for driving an external reverse battery NMOSFET protection
Charge pump current limited
PWM operation up to 30 kHz
SPI Interface
Current sense amplifier / free configurable
Zero adjust for end of line trimming
Power management: programmable free wheeling
Sensing circuitry of external MOSFETs with embedded thermal sensors
Liens connexes
- Coral G950-06809-01 for use with Raspberry Pi
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series Transistor Output 2
- Carling Technologies Illuminated DPDT, On-(On) Rocker Switch Panel Mount
- SICK Encoder Collets for Use with DBS36E-BBxxxx
- Littelfuse Through Hole Gas Discharge Tube
- Igus GFM-0607-08 6mm Bore Plain Bearing, 7mm O.D
- Raspberry Pi QWERTY (Spain) Raspberry Pi Keyboard
- Coral Google Mini PCIe M.2 Accelerator B/M Development Kit G650-04686-01
