onsemi, DC Motor Motor Driver IC 24-Pin, SSOP
- N° de stock RS:
- 189-0245
- Référence fabricant:
- NCV7719DQAR2G
- Fabricant:
- onsemi
Sous-total (1 bobine de 2500 unités)*
5 697,50 €
(TVA exclue)
6 895,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- 2 500 unité(s) expédiée(s) à partir du 13 janvier 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2500 + | 2,279 € | 5 697,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 189-0245
- Référence fabricant:
- NCV7719DQAR2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Motor Type | DC Motor | |
| Product Type | Motor Driver IC | |
| Configuration | SD Card | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Output Current | 550mA | |
| Pin Count | 24 | |
| Maximum Supply Voltage | 5.25V | |
| Minimum Supply Voltage | 3.15V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 5MHz | |
| Maximum Operating Temperature | 150°C | |
| Width | 3.9mm | |
| Length | 8.64mm | |
| Series | NCV7719 | |
| Height | 1.65mm | |
| Standards/Approvals | PPAP, AEC-Q100 | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 2.5mA | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Motor Type DC Motor | ||
Product Type Motor Driver IC | ||
Configuration SD Card | ||
Mount Type Surface | ||
Package Type SSOP | ||
Output Current 550mA | ||
Pin Count 24 | ||
Maximum Supply Voltage 5.25V | ||
Minimum Supply Voltage 3.15V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 5MHz | ||
Maximum Operating Temperature 150°C | ||
Width 3.9mm | ||
Length 8.64mm | ||
Series NCV7719 | ||
Height 1.65mm | ||
Standards/Approvals PPAP, AEC-Q100 | ||
Automotive Standard AEC-Q100 | ||
Supply Current 2.5mA | ||
The NCV7719 Octal is an eight channel half-bridge driver with protection features designed specifically for automotive and industrial motion control applications. The product has independent controls and diagnostics, and the drivers can be operated in forward, reverse, brake, and high impedance states. The device is controlled via a 16 bit SPI interface and is daisy chain compatible.
Low Quiescent Current Sleep Mode
High Side and Low Side Drivers Connected in a Half Bridge Configuration
Integrated Freewheeling Protection (LS and HS)
0.55 A Peak Current
RDS(on) = 1 ohm (typ)
5 MHz SPI Control
Compliance with 5 V and 3. 3 V Systems
Undervoltage and Overvoltage Lockout
Overcurrent Protection, Overtemperature Protection
Under Load Detection
Discriminated Fault Reporting
16Bit Frame Detection
Daisy Chain Compatible with Multiple of 8 bit Devices
Applications
Automotive
Industrial
DC Motor Management for HVAC Application