onsemi NCV7708FDWR2G, DC Motor Motor Driver IC 28-Pin, SOIC
- N° de stock RS:
- 186-1270
- Référence fabricant:
- NCV7708FDWR2G
- Fabricant:
- onsemi
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 186-1270
- Référence fabricant:
- NCV7708FDWR2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Motor Driver IC | |
| Motor Type | DC Motor | |
| Configuration | Half Bridge | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 28 | |
| Output Current | 500mA | |
| Maximum Supply Voltage | 5.25V | |
| Minimum Supply Voltage | 3.15V | |
| Typical Switching Frequency | 5MHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Width | 7.6mm | |
| Height | 2.36mm | |
| Length | 18.05mm | |
| Standards/Approvals | No | |
| Series | NCV7708 | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 3mA | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Motor Driver IC | ||
Motor Type DC Motor | ||
Configuration Half Bridge | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 28 | ||
Output Current 500mA | ||
Maximum Supply Voltage 5.25V | ||
Minimum Supply Voltage 3.15V | ||
Typical Switching Frequency 5MHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Width 7.6mm | ||
Height 2.36mm | ||
Length 18.05mm | ||
Standards/Approvals No | ||
Series NCV7708 | ||
Automotive Standard AEC-Q100 | ||
Supply Current 3mA | ||
The NCV7708F is a fully protected Hex−Half Bridge−Driver designed specifically for automotive and industrial motion control applications. The six low and high side drivers are freely configurable and can be controlled separately. This allows for high side, low side, and H−Bridge control. H−Bridge control provides forward, reverse, brake, and high impedance states. The drivers are controlled via a standard SPI interface.
Ultra Low Quiescent Current Sleep Mode
Six Independent High−Side and Six independent Low−Side Drivers
Integrated Freewheeling Protection (LS and HS)
Internal Upper and Lower Clamp Diodes
Configurable as H−Bridge Drivers
RDS(on) = 0.6 Ω (typ)
5 MHz SPI Control
SPI Valid Frame Detection
Compliance with 5 V and 3.3 V Systems
Over- and undervoltage Lockout
Fault Reporting
Current Limit
Overtemperature Protection
Internally Fused Lead in SOIC−28 Packaged for Better Thermal Performance
SSOP-24 NB EPAD
Applications
Automotive
Industrial
DC Motor Management
End Products
HVAC