STMicroelectronics VNH7100BASTR, DC Motor Motor Driver IC 16-Pin, SOIC
- N° de stock RS:
- 164-7035
- Référence fabricant:
- VNH7100BASTR
- Fabricant:
- STMicroelectronics
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 paquet de 2 unités)*
6,77 €
(TVA exclue)
8,192 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 30 mars 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 2 - 18 | 3,385 € | 6,77 € |
| 20 - 98 | 3,27 € | 6,54 € |
| 100 - 198 | 3,17 € | 6,34 € |
| 200 + | 2,75 € | 5,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 164-7035
- Référence fabricant:
- VNH7100BASTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Motor Driver IC | |
| Motor Type | DC Motor | |
| Configuration | H Bridge | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Output Current | 15A | |
| Pin Count | 16 | |
| Minimum Supply Voltage | 4V | |
| Maximum Supply Voltage | 28V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 20kHz | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.25mm | |
| Length | 10mm | |
| Width | 4mm | |
| Standards/Approvals | No | |
| Series | VNH | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 6mA | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Motor Driver IC | ||
Motor Type DC Motor | ||
Configuration H Bridge | ||
Mount Type Surface | ||
Package Type SOIC | ||
Output Current 15A | ||
Pin Count 16 | ||
Minimum Supply Voltage 4V | ||
Maximum Supply Voltage 28V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 20kHz | ||
Maximum Operating Temperature 150°C | ||
Height 1.25mm | ||
Length 10mm | ||
Width 4mm | ||
Standards/Approvals No | ||
Series VNH | ||
Automotive Standard AEC-Q100 | ||
Supply Current 6mA | ||
The device is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches. Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower®M0 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuitry. The three dies are assembled in SO-16N package on electrically isolated leadframes. Moreover, its fully symmetrical mechanical design allows superior manufacturability at board level.
Output current: 15 A
3 V CMOS-compatible inputs
Undervoltage shutdown
Overvoltage clamp
Thermal shutdown
Cross-conduction protection
Current and power limitation
Very low standby power consumption
Protection against loss of ground and loss of VCC