STMicroelectronics, Stepper Motor Driver IC 16-Pin, QFN
- N° de stock RS:
- 163-7333
- Référence fabricant:
- STSPIN220
- Fabricant:
- STMicroelectronics
Sous-total (1 bobine de 4000 unités)*
4 436,00 €
(TVA exclue)
5 368,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 18 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 4000 + | 1,109 € | 4 436,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 163-7333
- Référence fabricant:
- STSPIN220
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Motor Driver IC | |
| Motor Type | Stepper | |
| Configuration | H Bridge | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Output Current | 1.3A | |
| Pin Count | 16 | |
| Maximum Supply Voltage | 10V | |
| Minimum Supply Voltage | 1.8V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Series | STSPIN | |
| Length | 3.15mm | |
| Height | 0.98mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Motor Driver IC | ||
Motor Type Stepper | ||
Configuration H Bridge | ||
Mount Type Surface | ||
Package Type QFN | ||
Output Current 1.3A | ||
Pin Count 16 | ||
Maximum Supply Voltage 10V | ||
Minimum Supply Voltage 1.8V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Series STSPIN | ||
Length 3.15mm | ||
Height 0.98mm | ||
Automotive Standard No | ||
The STSPIN220 is a stepper motor driver which integrates, in a small QFN 3 x 3 mm package, both control logic and a low RDS(on) power stage. The integrated controller implements PWM current control with fixed OFF time and a microstepping resolution up to 1/256th of a step. The device is designed to operate in battery-powered scenarios and can be forced into a zero-consumption state, allowing a significant increase in battery life. The device offers a complete set of protection features including overcurrent, overtemperature and short-circuit protection
Operating voltage:from 1.8 to 10 V
Maximum output current:1.3 Arms
RDS(on) HS + LS = 0.4 Ω typ
Microstepping up to 1/256th of a step
Current control with programmable off-time
Full protection set
Non-dissipative overcurrent protection
Short-circuit protection
Thermal shutdown
Energy saving and long battery life with standby consumption less than 80 nA