Microchip TC648BEOA, Brushless DC Motor Motor Driver IC 8-Pin, SOIC
- N° de stock RS:
- 649-553
- Référence fabricant:
- TC648BEOA
- Fabricant:
- Microchip
Sous-total (1 paquet de 2 unités)*
1,96 €
(TVA exclue)
2,38 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Dernier stock RS
- 246 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité | le paquet* |
|---|---|---|
| 2 + | 0,98 € | 1,96 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 649-553
- Référence fabricant:
- TC648BEOA
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Motor Type | Brushless DC Motor | |
| Product Type | Motor Driver IC | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Output Current | 5mA | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 3V | |
| Typical Switching Frequency | 30Hz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Series | TC64 | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Supply Current | 200μA | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Motor Type Brushless DC Motor | ||
Product Type Motor Driver IC | ||
Package Type SOIC | ||
Pin Count 8 | ||
Output Current 5mA | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 3V | ||
Typical Switching Frequency 30Hz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Series TC64 | ||
Standards/Approvals No | ||
Automotive Standard No | ||
Supply Current 200μA | ||
- Pays d'origine :
- TH
The Microchip Switch mode fan speed controller which incorporates a new fan auto restart function. Temperature proportional speed control is accomplished using pulse width modulation. A thermistor (or other voltage output temperature sensor) connected to the VIN input supplies the required control voltage of 1.20V to 2.60V (typical) for 0% to 100% PWM duty cycle. The auto-shutdown speed is set by a simple resistor divider on the VAS input. An integrated Start-Up Timer ensures reliable fan motor start-up at turn-on, coming out of shutdown mode, auto-shutdown mode, or following a transient fault.
Over Temperature Indication
Efficient PWM Drive
Automatic Shutdown Mode for Green Systems
3.0 V to 5.5 V Supply Range
Supports Low Cost NTC and PTC Thermistors