Microchip MCP8027T-H/Q9X, Brushless DC Motor Driver 40-Pin, QFN
- N° de stock RS:
- 352-278P
- Référence fabricant:
- MCP8027T-H/Q9X
- Fabricant:
- Microchip
Offre groupée disponible
Consulter les options de prix de grosSous-total 20 unités (conditionné en bande continue)*
37,10 €
(TVA exclue)
44,90 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 300 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 20 - 198 | 1,855 € |
| 200 - 998 | 1,715 € |
| 1000 - 1998 | 1,59 € |
| 2000 + | 1,285 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 352-278P
- Référence fabricant:
- MCP8027T-H/Q9X
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Motor Type | Brushless | |
| Product Type | DC Motor Driver | |
| Configuration | 3 Phase | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 40 | |
| Output Current | 3A | |
| Minimum Supply Voltage | 6V | |
| Maximum Supply Voltage | 28V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 461kHz | |
| Maximum Operating Temperature | 150°C | |
| Height | 0.9mm | |
| Series | MCP8027 | |
| Standards/Approvals | JEDEC JS-001-2017, ISO 16750-2, CEI/IEC 60749-26:2006, ESD-STM5.3.1-1999, JEDEC JESD78, RoHS, CDM13073, AEC-Q100-002-Ref E | |
| Length | 5mm | |
| Supply Current | 1090μA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Motor Type Brushless | ||
Product Type DC Motor Driver | ||
Configuration 3 Phase | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 40 | ||
Output Current 3A | ||
Minimum Supply Voltage 6V | ||
Maximum Supply Voltage 28V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 461kHz | ||
Maximum Operating Temperature 150°C | ||
Height 0.9mm | ||
Series MCP8027 | ||
Standards/Approvals JEDEC JS-001-2017, ISO 16750-2, CEI/IEC 60749-26:2006, ESD-STM5.3.1-1999, JEDEC JESD78, RoHS, CDM13073, AEC-Q100-002-Ref E | ||
Length 5mm | ||
Supply Current 1090μA | ||
Automotive Standard No | ||
- Pays d'origine :
- TH
The Microchip 3-Phase brushless gate driver with power module and 5 uA (typ) sleep-mode current. The MCP8027 device integrates three half-bridge drivers to drive external NMOS/NMOS transistor pairs configured to drive a 3-phase BLDC motor, a comparator, a voltage regulator to provide bias to a companion microcontroller, power monitoring comparators, an over temperature sensor, two level translators and three operational amplifiers for motor current monitoring. The MCP8027 has three half-bridge drivers capable of delivering a peak output current of 0.5A at 12V for driving high-side and low-side NMOS MOSFET transistors. The drivers have shoot-through, overcurrent, and short-circuit protection.
Internal Bandgap Reference
Three Operational Amplifiers for Motor Phase Current Monitoring and Position Detection
Overcurrent Comparator
Two Level Translators
Thermal Warning and Shutdown