Actuonix Motor Controller, 5/24 V dc, 4 A

Voir la catégorie
Offre groupée disponible

Sous-total (1 unité)*

78,58 €

(TVA exclue)

95,08 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 10 unité(s) prête(s) à être expédiée(s)
  • Plus 31 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 - 478,58 €
5 - 975,44 €
10 +73,87 €

*Prix donné à titre indicatif

N° de stock RS:
918-1372
Référence fabricant:
LAC-RS
Fabricant:
Actuonix
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Actuonix

Product Type

Motor Controller

Supply Voltage

5/24 V dc

Output Voltage

3.3 V

Current Rating

4 A

Overall Length

50mm

Overall Width

50mm

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

70°C

Standards/Approvals

No

Linear Actuator Control Board


The LAC board from Actuonix is a standalone closed loop control board specially designed for the P series actuators. By using this LAC board with Actuonix actuators you can greatly simplify motor control designs, saving cost and time.

Actuonix motor control IC uses a software-based algorithm which optimises position and speed control. The linear actuator board is then compatible with a wide range of actuators, using only the default settings.

Full customisation is possible due to Actuonix Advanced Configuration Program.

The LAC can be operated as an interface board or a standalone controller with the addition of an external potentiometer and power supply.

Control Modes


0 V to 3.3 V Interface Mode


This mode allows an actuator to be controlled with just a battery, and a potentiometer to signal the desired position to the actuator.

RC Servo Interface Mode


A standard hobby-type remote-control digital servo interface, compatible with servos and receivers from other manufacturers.

4 mA to 20 mA Interface Mode


This mode is compatible with PLC devices typically used in industrial control applications.

PWM Mode


This mode allows control of the actuator using a single digital output pin from an external micro controller.

USB Mode


This mode allows control of the actuator via the computer.

Features and Benefits


• Several control modes available

• Compatible with P series actuators

• Can be operated as an interface board or standalone controller

Application Information


The LAC works with the PQ12-P, L12-P, L16-P and P16-P series actuators. It can also be able to drive other larger actuators that have position feedback.


Micro Linear Actuators


Note

A 6 vdc or 12 vdc power supply is required for operation (not included)

Liens connexes