Geckodrive 0.01 kW Stepper Motor Controller, 80V dc, 2 Phase, 7A
- N° de stock RS:
- 793-4121
- Référence fabricant:
- G203V
- Fabricant:
- Geckodrive
Sous-total (1 unité)*
379,28 €
(TVA exclue)
458,93 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 379,28 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 793-4121
- Référence fabricant:
- G203V
- Fabricant:
- Geckodrive
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Geckodrive | |
| Number of Phases | 2 | |
| Product Type | Stepper Motor Controller | |
| Output Voltage | 80V dc | |
| Supply Voltage | 80V dc | |
| Current Rating | 7A | |
| Power Rating | 0.01kW | |
| Overall Length | 63.5mm | |
| Overall Width | 21mm | |
| Overall Depth | 65.5mm | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Geckodrive | ||
Number of Phases 2 | ||
Product Type Stepper Motor Controller | ||
Output Voltage 80V dc | ||
Supply Voltage 80V dc | ||
Current Rating 7A | ||
Power Rating 0.01kW | ||
Overall Length 63.5mm | ||
Overall Width 21mm | ||
Overall Depth 65.5mm | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals No | ||
- Pays d'origine :
- US
G203V - Stepper Drive
The G203V is the new generation CPLD-based microstep drive. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection, over-temperature protection, reversed power supply polarity protection and will survive accidental motor disconnects while powered-up. The “V” in G203V stands for “Vampire” as it is an unkillable drive.
The G203V uses a synchronous PWM design that is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage. The G203V is a jumper-free drive. There are no internal user settings at all so there is no need to ever remove the drive cover at all.
STEP, DIRECTION and DISABLE inputs are opto-isolated
These inputs are +2.5/3.3/5 VDC compatible
Direction is clocked in on the active step pulse edge
Needs heatsinking for current settings greater than 3 amps
LED-status indicators
Power supply voltage between 15 and 80 VDC