DiodesZetex Through Hole Micropower Omnipolar Hall-Effect Sensor Switch 2.5 V 5.5 V, SIP, 3-Pin
- N° de stock RS:
- 885-5388
- Référence fabricant:
- AH180-PG-A
- Fabricant:
- DiodesZetex
Sous-total (1 paquet de 10 unités)*
4,38 €
(TVA exclue)
5,30 €
(TVA incluse)
Ajouter 180 unités pour bénéficier d'une livraison gratuite
En stock
- 40 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 60 unité(s) expédiée(s) à partir du 26 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 0,438 € | 4,38 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 885-5388
- Référence fabricant:
- AH180-PG-A
- Fabricant:
- DiodesZetex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | DiodesZetex | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Micropower Omnipolar Hall-Effect Sensor Switch | |
| Technology | Chopper Stabilised | |
| Mount Type | Through Hole | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 2.5V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SIP | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Width | 1.6 mm | |
| Height | 3.2mm | |
| Standards/Approvals | RoHS | |
| Series | AH180 | |
| Length | 4.3mm | |
| Supply Current | 24μA | |
| Response Time | 125μs | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque DiodesZetex | ||
Sensor Type Hall Effect Sensors | ||
Product Type Micropower Omnipolar Hall-Effect Sensor Switch | ||
Technology Chopper Stabilised | ||
Mount Type Through Hole | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 2.5V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SIP | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Width 1.6 mm | ||
Height 3.2mm | ||
Standards/Approvals RoHS | ||
Series AH180 | ||
Length 4.3mm | ||
Supply Current 24μA | ||
Response Time 125μs | ||
Automotive Standard No | ||
Hall Effect Switches & Latches, Diodes Inc
Hall Effect Sensors, Diodes Inc
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three Basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.
Liens connexes
- DiodesZetex Through Hole Micropower Omnipolar Hall-Effect Sensor Switch 2.5 V 5.5 V 3-Pin
- DiodesZetex Surface Micropower Omnipolar Hall-effect Switch 2.5 V 5.5 V 3-Pin
- AH1888-ZG-7 DiodesZetex 5-Pin SOT-553
- DiodesZetex Through Hole Hall Effect Sensor 3-Pin
- DiodesZetex Surface Mount Hall Effect Sensor 3-Pin
- DiodesZetex Through Hole Hall Effect Latch Sensor 3.5 V 20 V 3-Pin
- DiodesZetex Surface Hall Effect Sensor 3 V 28 V 3-Pin
- DiodesZetex Through Hole Hall Effect Sensor 2.7 V 27 V 3-Pin