DiodesZetex Surface Hall Effect Sensor 2.5 V 5.5 V, SC-59, 3-Pin
- N° de stock RS:
- 828-3391P
- Référence fabricant:
- AH1808-W-7
- Fabricant:
- DiodesZetex
Sous-total 20 unités (conditionné en bande continue)*
5,40 €
(TVA exclue)
6,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 4 820 unité(s) expédiée(s) à partir du 24 décembre 2025
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 20 + | 0,27 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 828-3391P
- Référence fabricant:
- AH1808-W-7
- Fabricant:
- DiodesZetex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | DiodesZetex | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | Chopper Stabilised | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 2.5V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SC-59 | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Width | 1.7 mm | |
| Length | 3.1mm | |
| Height | 1.3mm | |
| Series | AH1808 | |
| Supply Current | 28μA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque DiodesZetex | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology Chopper Stabilised | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 2.5V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SC-59 | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Width 1.7 mm | ||
Length 3.1mm | ||
Height 1.3mm | ||
Series AH1808 | ||
Supply Current 28μA | ||
Automotive Standard No | ||
Hall Effect Switches & Latches, Diodes Inc
Hall Effect Sensors, Diodes Inc
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three Basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.