Allegro Microsystems 1-Axis Surface Hall Effect Sensor 3.8 V 24 V, SOT-23, 3-Pin
- N° de stock RS:
- 680-7100
- Référence fabricant:
- A1102ELHLT-T
- Fabricant:
- Allegro Microsystems
Offre groupée disponible
Sous-total (1 paquet de 5 unités)*
5,23 €
(TVA exclue)
6,33 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 220 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 - 20 | 1,046 € | 5,23 € |
| 25 - 95 | 1,02 € | 5,10 € |
| 100 - 245 | 0,988 € | 4,94 € |
| 250 - 495 | 0,968 € | 4,84 € |
| 500 + | 0,946 € | 4,73 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 680-7100
- Référence fabricant:
- A1102ELHLT-T
- Fabricant:
- Allegro Microsystems
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Allegro Microsystems | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Number of Axis | 1 | |
| Technology | BiCMOS | |
| Mount Type | Surface | |
| Magnetic Type | Unipolar | |
| Minimum Supply Voltage | 3.8V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Length | 2.98mm | |
| Series | A1102 | |
| Height | 0.95mm | |
| Width | 1.91 mm | |
| Supply Current | 4.1mA | |
| Response Time | 4μs | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque Allegro Microsystems | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Number of Axis 1 | ||
Technology BiCMOS | ||
Mount Type Surface | ||
Magnetic Type Unipolar | ||
Minimum Supply Voltage 3.8V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Length 2.98mm | ||
Series A1102 | ||
Height 0.95mm | ||
Width 1.91 mm | ||
Supply Current 4.1mA | ||
Response Time 4μs | ||
Automotive Standard AEC-Q100 | ||
- Pays d'origine :
- PH
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.
Continuous-time operation with fast power-on time and low noise
Stable operation over full operating temperature range
Reverse battery protection
Solid-state reliability
Factory-programmed at end of line for optimum performance
Robust EMC performance
High ESD rating
Regulator stability without a bypass capacitor
Hall Effect Sensors, Allegro MicroSystems
Liens connexes
- Allegro Microsystems 1-Axis Surface Hall Effect Sensor 3.8 V 24 V 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 3.8 V 24 V 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 3.8 V 24 V 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3.8 V 24 V 3-Pin
- Allegro Microsystems 1-Axis Surface Hall Effect Sensor 4.5 V 5.5 V SOT-23, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V 3-Pin
- Allegro Microsystems 2-Axis Surface Hall Effect Sensor 4 V 24 V 5-Pin
- Allegro Microsystems 1-Axis Surface Hall Effect Sensor 3 V 5.5 V 5-Pin