ROHM Surface Hall Effect Sensor 2.5 V 4.5 V, UCSP35L1, 4-Pin
- N° de stock RS:
- 240-4007
- Référence fabricant:
- BU52777GWZ-E2
- Fabricant:
- ROHM
Offre groupée disponible
Sous-total (1 paquet de 25 unités)*
13,05 €
(TVA exclue)
15,80 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Dernier stock RS
- 1 000 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité | le paquet* |
|---|---|---|
| 25 - 25 | 0,522 € | 13,05 € |
| 50 - 475 | 0,513 € | 12,83 € |
| 500 - 975 | 0,473 € | 11,83 € |
| 1000 - 2475 | 0,462 € | 11,55 € |
| 2500 + | 0,451 € | 11,28 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 240-4007
- Référence fabricant:
- BU52777GWZ-E2
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect | |
| Technology | Hall Effect | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 2.5V | |
| Package Type | UCSP35L1 | |
| Maximum Supply Voltage | 4.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 4 | |
| Standards/Approvals | RoHS | |
| Length | 0.8mm | |
| Width | 0.8 mm | |
| Series | BU52777GWZ | |
| Height | 0.4mm | |
| Automotive Standard | No | |
| Supply Current | 1.7μA | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect | ||
Technology Hall Effect | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 2.5V | ||
Package Type UCSP35L1 | ||
Maximum Supply Voltage 4.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 4 | ||
Standards/Approvals RoHS | ||
Length 0.8mm | ||
Width 0.8 mm | ||
Series BU52777GWZ | ||
Height 0.4mm | ||
Automotive Standard No | ||
Supply Current 1.7μA | ||
The ROHM hall IC incorporating a polarity determination circuit enables separate operation (output) of both the south and north poles. Using a magnet and the device, detection of open and close of the cover are possible in smart phones and tablets, and detection of putting wireless earphones in a case, and detection of front/back side or rotational direction are possible in digital cameras and other applications involving display panels.
Omni polar detection (OUT1 = S-pole detection, OUT2 = N-pole detection)
Micro power operation (small current using intermittent operation method)
Ultra-compact package
Liens connexes
- ROHM Surface Mount Hall Effect Sensor
- ROHM Surface Mount Hall Effect Sensor 4-Pin
- ROHM Surface Hall Effect Sensor 2.5 → 4.5 V, Block Body
- Texas Instruments Surface Mount Hall Effect Sensor
- Infineon Surface Mount Hall Effect Sensor Switch
- Infineon Surface Mount Hall Effect Sensor Latch
- Broadcom Surface Mount Hall Effect Sensor
- Infineon Surface Mount Hall Effect Sensor 6-Pin