Infineon Surface Hall Effect Sensor 4.5 V 5.5 V, SPC, TDSO, 8-Pin
- N° de stock RS:
- 236-3688
- Référence fabricant:
- TLE4999C8XUMA1
- Fabricant:
- Infineon
Offre groupée disponible
Sous-total (1 unité)*
6,75 €
(TVA exclue)
8,17 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 2 373 unité(s) expédiée(s) à partir du 05 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 6,75 € |
| 10 - 99 | 6,19 € |
| 100 - 249 | 5,71 € |
| 250 - 499 | 5,30 € |
| 500 + | 5,15 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 236-3688
- Référence fabricant:
- TLE4999C8XUMA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Sensor Type | Hall Effect | |
| Product Type | Hall Effect Sensor | |
| Technology | Digital | |
| Mount Type | Surface | |
| Interface Type | SPC | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | TDSO | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 125°C | |
| Series | TLE4999 | |
| Height | 1.2mm | |
| Length | 5.17mm | |
| Standards/Approvals | No | |
| Width | 4.02 mm | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 4mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Sensor Type Hall Effect | ||
Product Type Hall Effect Sensor | ||
Technology Digital | ||
Mount Type Surface | ||
Interface Type SPC | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Package Type TDSO | ||
Minimum Operating Temperature -40°C | ||
Pin Count 8 | ||
Maximum Operating Temperature 125°C | ||
Series TLE4999 | ||
Height 1.2mm | ||
Length 5.17mm | ||
Standards/Approvals No | ||
Width 4.02 mm | ||
Automotive Standard AEC-Q100 | ||
Supply Current 4mA | ||
The Infineon XENSIV is a dual channel linear hall sensor with a bus-capable digital SPC interface. Both channels are integrated on one die in the chip. The highly accurate measurement channels can be used for a plausibility check on system level. This enables a high diagnostic coverage.
Operating automotive temperature range -40°C to 125°C
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Main and sub channel programmable independently in EEPROM
Multipoint calibration up to 9 points
Frameholder mechanism
Liens connexes
- Infineon Surface Mount Hall Effect Sensor 8-Pin
- Infineon Surface Mount Hall Effect Sensor 8-Pin
- Infineon Surface Mount Hall Effect Sensor Switch
- Infineon Surface Mount Hall Effect Sensor Latch
- Infineon Surface Mount Hall Effect Sensor 6-Pin
- Infineon SMD Hall Effect Sensor
- Infineon Surface Mount Position Sensor SPC, 8-Pin
- Infineon Surface Mount Position Sensor PWM, 8-Pin