Infineon Surface Hall Effect Sensor Latch 3 V 32 V, Open Drain Output, SOT-23, 3-Pin
- N° de stock RS:
- 223-8582
- Référence fabricant:
- TLE49643MXTSA1
- Fabricant:
- Infineon
Offre groupée disponible
Sous-total (1 paquet de 20 unités)*
10,16 €
(TVA exclue)
12,30 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 1 720 unité(s) expédiée(s) à partir du 20 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 20 - 20 | 0,508 € | 10,16 € |
| 40 - 80 | 0,466 € | 9,32 € |
| 100 - 220 | 0,43 € | 8,60 € |
| 240 - 480 | 0,399 € | 7,98 € |
| 500 + | 0,389 € | 7,78 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 223-8582
- Référence fabricant:
- TLE49643MXTSA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | Hall Effect Sensor Latch | |
| Sensor Type | Hall Effect | |
| Mount Type | Surface | |
| Interface Type | Open Drain Output | |
| Magnetic Type | Unipolar | |
| Minimum Supply Voltage | 3V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 32V | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 12.5mT | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 170°C | |
| Width | 1.3 mm | |
| Length | 2.9mm | |
| Series | TLE49643 | |
| Height | 1mm | |
| Standards/Approvals | RoHS | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 1.6mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type Hall Effect Sensor Latch | ||
Sensor Type Hall Effect | ||
Mount Type Surface | ||
Interface Type Open Drain Output | ||
Magnetic Type Unipolar | ||
Minimum Supply Voltage 3V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 32V | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 12.5mT | ||
Pin Count 3 | ||
Maximum Operating Temperature 170°C | ||
Width 1.3 mm | ||
Length 2.9mm | ||
Series TLE49643 | ||
Height 1mm | ||
Standards/Approvals RoHS | ||
Automotive Standard AEC-Q100 | ||
Supply Current 1.6mA | ||
The Infineon XENSIV 3M hall effect switch dedicated for position detection applications. This device is an integrated hall effect switch designed specifically for highly accurate applications with superior supply voltage capability, operating temperature range and temperature stability of the magnetic thresholds.
Operation from unregulated power supply
Reverse polarity protection
Overvoltage capability up to 42 V without external resistor
Output overcurrent & over temperature protection
Active error compensation
High stability of magnetic thresholds
Liens connexes
- Infineon Surface Hall Effect Sensor Latch 3 V 32 V SOT-23, 3-Pin
- Infineon Surface Hall Effect Sensor Latch 3 V 26 V 3-Pin
- Infineon Surface Hall Effect Sensor 3 V 32 V SOT-23, 3-Pin
- Infineon Through Hole Hall Effect Sensor 32 V
- Infineon Surface Hall Effect Sensor Latch 3 V 5.5 V 3-Pin
- Infineon Surface Hall Effect Sensor Latch 3 V 32 V 3-Pin
- Infineon Through Hole Hall Effect Sensor 32 V 32V
- DiodesZetex Hall Effect Switch 4mA Solder -40 → 150°C, 3 → 28 V