Références fabricant

Infineon Surface Hall Effect Sensor -0.3 V 3.5V, I2C, TSOP-6, 6-Pin

N° de stock RS:: 218-6372
Référence fabricant:: TLI493DA2B6HTSA1
Fabricant:: Infineon

Infineon Surface Hall Effect Sensor -0.3 V 3.5V, I2C, TSOP-6, 6-Pin

Sous-total (1 bobine de 3000 unités)*

1 569,00 €

(TVA exclue)

1 899,00 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

Expédition à partir du 10 décembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	la bobine*
3000 +	0,523 €	1 569,00 €

*Prix donné à titre indicatif

N° de stock RS:: 218-6372
Référence fabricant:: TLI493DA2B6HTSA1
Fabricant:: Infineon

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Infineon
	Sensor Type	Hall Effect
	Product Type	Hall Effect Sensor
	Technology	Digital
	Mount Type	Surface
	Interface Type	I2C
	Minimum Supply Voltage	-0.3V
	Package Type	TSOP-6
	Maximum Supply Voltage	3.5V
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Pin Count	6
	Series	TLI493D-A2B6
	Height	1.1mm
	Length	2.9mm
	Standards/Approvals	RoHS
	Width	1.6mm
	Supply Current	3.4mA
	Automotive Standard	No

	Sélectionner tout
	Marque Infineon
	Sensor Type Hall Effect
	Product Type Hall Effect Sensor
	Technology Digital
	Mount Type Surface
	Interface Type I2C
	Minimum Supply Voltage -0.3V
	Package Type TSOP-6
	Maximum Supply Voltage 3.5V
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Pin Count 6
	Series TLI493D-A2B6
	Height 1.1mm
	Length 2.9mm
	Standards/Approvals RoHS
	Width 1.6mm
	Supply Current 3.4mA
	Automotive Standard No

Datasheet - TLI493DA2B6HTSA1

Infineon TLI493D-A2B6 Series Hall Effect Sensor, 3.5V Maximum Supply Voltage, 3.4mA Supply Current - TLI493DA2B6HTSA1

This Hall effect sensor provides a Compact digital magnetic sensing solution for electronic assemblies, communicating via an I2C Interface and designed for surface mounting in small‑footprint applications. It operates across a wide ambient temperature range and is intended for low‑power measurement tasks on densely populated PCBs.

Features and Benefits:

• Low supply current reduces power draw during continuous operation
• Operates from supply voltages up to 3.5 V enabling low‑voltage systems
• Six‑pin TSOP‑6 package simplifies PCB placement and soldering
• Wide temperature tolerance supports high‑temperature working conditions
• Digital Interface allows direct integration with microcontrollers

Applications

• Suitable for magnet position sensing in Compact electronics
• Ideal for battery‑powered devices requiring low‑power sensing
• Used with microcontrollers for magnetic field measurement tasks
• Can be used for PCB‑mounted proximity detection systems

What pin count should I allow on the PCB footprint?

The device requires a six‑pin footprint to match its TSOP‑6 package.

What is the expected current draw in normal operation?

The typical supply current is 3.4 mA during Active operation.

What supply voltage range must the power rail support?

The maximum allowable supply voltage is 3.5 V and the input lower limit reaches below ground to −0.3 V.

How tolerant is the device to environmental temperature extremes?

It is rated to function across a minimum of −40 °C up to a maximum of 125 °C.

What Interface protocol is available for system communication?

Communication is provided via an I2C digital interface.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.