Honeywell Technologies Surface Hall Effect Sensor 2.2 V 5.5V, SOT-23, 3-Pin
- N° de stock RS:
- 203-6317
- Référence fabricant:
- SL353LT
- Fabricant:
- Honeywell Technologies
Sous-total (1 bobine de 3000 unités)*
2 418,00 €
(TVA exclue)
2 925,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 000 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 0,806 € | 2 418,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 203-6317
- Référence fabricant:
- SL353LT
- Fabricant:
- Honeywell Technologies
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell Technologies | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | Digital | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 2.2V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOT-23 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 3 | |
| Series | SL353 | |
| Width | 2.8mm | |
| Standards/Approvals | RoHS | |
| Height | 1.2mm | |
| Length | 2.9mm | |
| Automotive Standard | No | |
| Supply Current | 2.5mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell Technologies | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology Digital | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 2.2V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOT-23 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 3 | ||
Series SL353 | ||
Width 2.8mm | ||
Standards/Approvals RoHS | ||
Height 1.2mm | ||
Length 2.9mm | ||
Automotive Standard No | ||
Supply Current 2.5mA | ||
- Pays d'origine :
- CN
Honeywell SL353 Series Hall Effect Sensor, 2.9mm Length, 1.2mm Height - SL353LT
This hall effect sensor is a digital, omnipolar magnetic detector intended for low-voltage embedded systems. It operates across a modest supply range and is supplied in a Compact surface-mount package suitable for board-level integration. The device targets applications that require a small footprint and low operating current while functioning within a defined temperature window.
Features and Benefits:
• 2.2V to 5.5V supply range enables low-voltage system compatibility
• 2.5mA supply current reduces power draw in battery-powered designs
• Omnipolar detection allows sensing without magnet polarity alignment
• 3-pin SOT-23 format simplifies PCB routing and mounting
• RoHS conformity supports regulated electronics production requirements
• 2.5mA supply current reduces power draw in battery-powered designs
• Omnipolar detection allows sensing without magnet polarity alignment
• 3-pin SOT-23 format simplifies PCB routing and mounting
• RoHS conformity supports regulated electronics production requirements
Applications
• Suitable for position sensing in Compact actuators
• Ideal for proximity detection in handheld devices
• Used for rotational speed sensing in small motors
• Can be used for non-contact switching in consumer electronics
• Suitable for integration into low-power monitoring modules
• Ideal for proximity detection in handheld devices
• Used for rotational speed sensing in small motors
• Can be used for non-contact switching in consumer electronics
• Suitable for integration into low-power monitoring modules
What mounting method does it require?
It is designed for surface mounting onto standard PCBs using SOT-23 soldering processes.
What package dimensions affect PCB layout?
The small SOT-23 body measures 2.9mm by 2.8mm with 1.2mm height which determines land pattern spacing.
How does the sensor behave across temperature extremes?
It operates over the range -40°C to 85°C and maintains digital output within that span.
What electrical Interface is required to read the output?
It provides a digital output compatible with typical logic-level inputs in embedded systems.
Is it suitable for automotive applications?
It is not specified as automotive-grade and should not be assumed to meet automotive standards.
Liens connexes
- Honeywell Technologies Surface Hall Effect Sensor 2.2 V 5.5V 3-Pin
- Honeywell Technologies Surface Hall Effect Sensor 1.65 V 5.5V 3-Pin
- Honeywell Technologies Surface Hall Effect Sensor 1.65 V 5.5V SOT-23, 3-Pin
- Honeywell Technologies Surface Hall Effect Sensor 2.7 V 6.5V 3-Pin
- Honeywell Technologies Surface Hall Effect Sensor 4.5 V 24V 3-Pin
- Honeywell Technologies Surface Hall Effect Sensor 3 V 24V 3-Pin
- Honeywell Technologies Surface Hall Effect Sensor -28 V 28V 3-Pin
- Honeywell Technologies Surface Hall Effect Sensor 3 V 26V 3-Pin