STMicroelectronics 3 Axis Surface Sensor 2.1 V 3.6V, SPI, LGA-14, 14-Pin
- N° de stock RS:
- 201-0402
- Référence fabricant:
- IIS3DWBTR
- Fabricant:
- STMicroelectronics
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 201-0402
- Référence fabricant:
- IIS3DWBTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Sensor | |
| Sensor Type | SIL CL 1 | |
| Number of Axis | 3 | |
| Technology | Digital | |
| Mount Type | Surface | |
| Interface Type | SPI | |
| Maximum Frequency Response | 6.3kHz | |
| Minimum Frequency Response | 0Hz | |
| Minimum Supply Voltage | 2.1V | |
| Maximum Supply Voltage | 3.6V | |
| Package Type | LGA-14 | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 0.061mg/LSB | |
| Pin Count | 14 | |
| Maximum Operating Temperature | 105°C | |
| Height | 0.83mm | |
| Length | 2.5mm | |
| Series | IIS3DWB | |
| Standards/Approvals | ECOPACK, RoHS, GREEN | |
| Automotive Standard | No | |
| Supply Current | 1.1mA | |
| Response Time | 10ms | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Sensor | ||
Sensor Type SIL CL 1 | ||
Number of Axis 3 | ||
Technology Digital | ||
Mount Type Surface | ||
Interface Type SPI | ||
Maximum Frequency Response 6.3kHz | ||
Minimum Frequency Response 0Hz | ||
Minimum Supply Voltage 2.1V | ||
Maximum Supply Voltage 3.6V | ||
Package Type LGA-14 | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 0.061mg/LSB | ||
Pin Count 14 | ||
Maximum Operating Temperature 105°C | ||
Height 0.83mm | ||
Length 2.5mm | ||
Series IIS3DWB | ||
Standards/Approvals ECOPACK, RoHS, GREEN | ||
Automotive Standard No | ||
Supply Current 1.1mA | ||
Response Time 10ms | ||
IIS3DWBTR - Ultra-wide bandwidth, low-noise, 3-axis digital vibration sensor
The STMicroelectronics 3-axis digital vibration sensor with low noise over an ultra-wide bandwidth. It has flat frequency range. It has high performance delivered at low power consumption together with the digital output and the embedded digital features like the FIFO. It used selectable full-scale acceleration range of ±2/±4/±8/±16g and it is capable of measuring acceleration with a bandwidth up to 6 kHz with an output data rate of 26.7 kHz.
Supply voltage is 2.1 V to 3.6 V
Low-pass or high-pass filter with selectable cut-off frequency
Embedded self-test
SPI serial interface
Liens connexes
- STMicroelectronics 3 Axis Surface Sensor 2.1 V 3.6V LGA-14, 14-Pin
- STMicroelectronics 3 Axis Surface Accelerometer 1.71 V 3.6V SPI 14-Pin
- STMicroelectronics 3 Axis Surface Accelerometer 1.71 V 3.6V LGA, 14-Pin
- STMicroelectronics 6 Axis Surface Sensor 3 V 3.6V SPI 14-Pin
- STMicroelectronics 3 Axis Surface Accelerometer & Gyroscope 1.71 V 3.6V I2C 14-Pin
- STMicroelectronics 6 Axis Surface Inertial Sensor 1.71 V 3.6V LGA-14L, 14-Pin
- STMicroelectronics 3 Axis Surface Sensor 1.71 V 3.6V Serial-SPI 14-Pin
- STMicroelectronics 6 Axis Surface Motion Sensor Module 1.71 V 3.6V I2C 14-Pin