Allegro Microsystems Surface Hall Effect Sensor 2.5 V 3.5 V, MLP, 6-Pin
- N° de stock RS:
- 177-5546
- Référence fabricant:
- A1395SEHLT-T
- Fabricant:
- Allegro Microsystems
Sous-total (1 bobine de 3000 unités)*
2 391,00 €
(TVA exclue)
2 892,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 01 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 0,797 € | 2 391,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-5546
- Référence fabricant:
- A1395SEHLT-T
- Fabricant:
- Allegro Microsystems
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | BiCMOS | |
| Mount Type | Surface | |
| Magnetic Type | Linear | |
| Maximum Frequency Response | 10kHz | |
| Minimum Supply Voltage | 2.5V | |
| Maximum Supply Voltage | 3.5V | |
| Package Type | MLP | |
| Sensitivity | 10mV/g | |
| Minimum Operating Temperature | -20°C | |
| Pin Count | 6 | |
| Maximum Operating Temperature | 85°C | |
| Width | 3 mm | |
| Standards/Approvals | RoHS, Pb (lead) Free | |
| Series | A139x | |
| Length | 2mm | |
| Height | 0.67mm | |
| Supply Current | 3.2mA | |
| Response Time | 40μs | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology BiCMOS | ||
Mount Type Surface | ||
Magnetic Type Linear | ||
Maximum Frequency Response 10kHz | ||
Minimum Supply Voltage 2.5V | ||
Maximum Supply Voltage 3.5V | ||
Package Type MLP | ||
Sensitivity 10mV/g | ||
Minimum Operating Temperature -20°C | ||
Pin Count 6 | ||
Maximum Operating Temperature 85°C | ||
Width 3 mm | ||
Standards/Approvals RoHS, Pb (lead) Free | ||
Series A139x | ||
Length 2mm | ||
Height 0.67mm | ||
Supply Current 3.2mA | ||
Response Time 40μs | ||
Automotive Standard No | ||
A1391/2/3/5 3V Linear Hall Effect Sensors, Allegro Microsystems
The A1391/2/3/5 family of linear Hall effect sensors provides a voltage output that is directly proportional to an applied magnetic field.
The A139x minimise current consumption to less than 25 μA through the addition of a user-selectable sleep mode, perfect for battery-operated applications. You can control the current consumption by applying a logic level signal to the SLEEP pin. The outputs of the devices are not valid (high-impedance mode) during sleep mode.
High-impedance output during sleep mode
Compatible with 2.5 V to 3.5 V power supplies
10 mW power consumption in the active mode
Ratiometric output scales with the ratiometric supply reference voltage (VREF pin)
Temperature-stable quiescent output voltage and sensitivity
Wide ambient temperature range: –20°C to 85°C
ESD protection greater than 3 kV
Preset sensitivity and offset at final test
Hall Effect Sensors, Allegro MicroSystems
Liens connexes
- Allegro Microsystems Surface Mount Hall Effect Sensor 6-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor 8-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor 5-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor 5-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor 16-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor Switch 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3-Pin