Silicon Labs 1 Axis Surface Hall Effect Sensor 1.7 V 5.5 V, SENT, PWM, Analogue, SOT-23, 3-Pin
- N° de stock RS:
- 144-1573
- Référence fabricant:
- Si7213-B-00-IVR
- Fabricant:
- Silicon Labs
Sous-total (1 bobine de 3000 unités)*
1 917,00 €
(TVA exclue)
2 319,00 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 0,639 € | 1 917,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 144-1573
- Référence fabricant:
- Si7213-B-00-IVR
- Fabricant:
- Silicon Labs
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Silicon Labs | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Number of Axis | 1 | |
| Technology | CMOS | |
| Mount Type | Surface | |
| Magnetic Type | Open Drain SENT | |
| Interface Type | SENT, PWM, Analogue | |
| Maximum Frequency Response | 7kHz | |
| Minimum Frequency Response | 10Hz | |
| Minimum Supply Voltage | 1.7V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOT-23 | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 3% | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 125°C | |
| Length | 2.9mm | |
| Standards/Approvals | Ford EMC-CS-2009.1, ISO 7637-2-2-11 | |
| Series | Si721X | |
| Height | 1.15mm | |
| Width | 1.6 mm | |
| Supply Current | 5.5mA | |
| Automotive Standard | AEC-Q100 | |
| Response Time | 8.8μs | |
| Sélectionner tout | ||
|---|---|---|
Marque Silicon Labs | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Number of Axis 1 | ||
Technology CMOS | ||
Mount Type Surface | ||
Magnetic Type Open Drain SENT | ||
Interface Type SENT, PWM, Analogue | ||
Maximum Frequency Response 7kHz | ||
Minimum Frequency Response 10Hz | ||
Minimum Supply Voltage 1.7V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOT-23 | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 3% | ||
Pin Count 3 | ||
Maximum Operating Temperature 125°C | ||
Length 2.9mm | ||
Standards/Approvals Ford EMC-CS-2009.1, ISO 7637-2-2-11 | ||
Series Si721X | ||
Height 1.15mm | ||
Width 1.6 mm | ||
Supply Current 5.5mA | ||
Automotive Standard AEC-Q100 | ||
Response Time 8.8μs | ||
Si721x Series Hall Effect Field Output Sensors
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge Nibble Transmission) outputs. Typical applications include mechanical position sensing in consumer, industrial and automotive applications, Camera image stabilization, zoom, and autofocus functions, sensing of control knobs and selector switches.
• Industry-leading sensitivity allows use with larger Air gaps and smaller magnets
• Precise compensation for temperature and offset drift.
• Low power consumption to improve operating life in battery powered applications
• Low voltage (1.7-5.5V) and High voltage (3.3-26.5V) versions
• Compact 3 or 5-pin SOT23 package
• AEC-Q100 Qualified for automotive applications
Hall Effect Sensors, Silicon Labs
Liens connexes
- Silicon Labs 1 Axis Surface Hall Effect Sensor 1.7 V 5.5 V PWM SOT-23, 3-Pin
- Silicon Labs 1 Axis Surface Hall Effect Sensor 2.25 V 5.5 V Analogue SOT-23, 3-Pin
- Silicon Labs 1 Axis Surface Hall Effect Sensor 2.25 V 5.5 V SENT SOT-23, 5-Pin
- Silicon Labs 1 Axis Surface Hall Effect Sensor 1.7 V 5.5 V 3-Pin
- Silicon Labs 1 Axis Surface Switch/Latch Hall Effect Magnetic Position Sensor 1.7 V 5.5 V 3-Pin
- Silicon Labs Surface Hall Effect Sensor 1.7 V 5.5 V SOT-23, 5-Pin
- Silicon Labs Surface Mount Hall Effect Sensor 1.7 V 5.5 V 5-Pin
- Silicon Labs 1 Axis Surface Hall Effect Sensor 1.71 V 5.5 V DFN-8