DiodesZetex Surface Hall Effect Sensor 2.5 V 3.6V, SOT-553, 6-Pin
- N° de stock RS:
- 122-1487
- Référence fabricant:
- AH1806-Z-7
- Fabricant:
- DiodesZetex
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 122-1487
- Référence fabricant:
- AH1806-Z-7
- Fabricant:
- DiodesZetex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | DiodesZetex | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | Chopper Stabilised | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 2.5V | |
| Package Type | SOT-553 | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 6 | |
| Maximum Operating Temperature | 85°C | |
| Series | AH1806 | |
| Length | 1.6mm | |
| Height | 0.6mm | |
| Standards/Approvals | Antimony-Free, RoHS | |
| Automotive Standard | No | |
| Supply Current | 28μA | |
| Response Time | 125μs | |
| Sélectionner tout | ||
|---|---|---|
Marque DiodesZetex | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology Chopper Stabilised | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 2.5V | ||
Package Type SOT-553 | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 6 | ||
Maximum Operating Temperature 85°C | ||
Series AH1806 | ||
Length 1.6mm | ||
Height 0.6mm | ||
Standards/Approvals Antimony-Free, RoHS | ||
Automotive Standard No | ||
Supply Current 28μA | ||
Response Time 125μs | ||
- Pays d'origine :
- CN
Hall Effect Switches & Latches, Diodes Inc
Hall Effect Sensors, Diodes Inc
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three Basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.