STMicroelectronics 3 Axis Surface Sensor 2.16 V 3.6V, Serial-I2C, Serial-4 Wire, Serial-SPI, Serial-3 Wire, TFLGA,
- N° de stock RS:
- 111-6448P
- Référence fabricant:
- H3LIS100DLTR
- Fabricant:
- STMicroelectronics
Sous-total 2 unités (conditionné en bande continue)*
8,95 €
(TVA exclue)
10,83 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Dernier stock RS
- 4 576 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité |
|---|---|
| 2 + | 4,475 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 111-6448P
- Référence fabricant:
- H3LIS100DLTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Sensor Type | Accelerometer | |
| Product Type | Sensor | |
| Number of Axis | 3 | |
| Technology | Analogue, Digital | |
| Mount Type | Surface | |
| Interface Type | Serial-I2C, Serial-4 Wire, Serial-SPI, Serial-3 Wire | |
| Minimum Supply Voltage | 2.16V | |
| Package Type | TFLGA | |
| Maximum Supply Voltage | 3.6V | |
| Sensitivity | 780mg/digit | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 16 | |
| Maximum Operating Temperature | 85°C | |
| Width | 3mm | |
| Series | H3LIS100DLTR | |
| Standards/Approvals | No | |
| Height | 1mm | |
| Length | 3mm | |
| Automotive Standard | No | |
| Supply Current | 10μA | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Sensor Type Accelerometer | ||
Product Type Sensor | ||
Number of Axis 3 | ||
Technology Analogue, Digital | ||
Mount Type Surface | ||
Interface Type Serial-I2C, Serial-4 Wire, Serial-SPI, Serial-3 Wire | ||
Minimum Supply Voltage 2.16V | ||
Package Type TFLGA | ||
Maximum Supply Voltage 3.6V | ||
Sensitivity 780mg/digit | ||
Minimum Operating Temperature -40°C | ||
Pin Count 16 | ||
Maximum Operating Temperature 85°C | ||
Width 3mm | ||
Series H3LIS100DLTR | ||
Standards/Approvals No | ||
Height 1mm | ||
Length 3mm | ||
Automotive Standard No | ||
Supply Current 10μA | ||
- Pays d'origine :
- MT
Accelerometer ICs, STMicroelectronics
ST’s MEMS accelerometers include analogue and digital sensors featuring up to ±400g acceleration full scale and from 1.71 to 3.6 V supply voltage. Advanced power-saving features include ultra-low-power mode, auto wake-up function and FIFO buffer that can be used to store data reducing the host processor loading and system power consumption.
These accelerometers can be used in portable applications such as smart phones & PDA’s, or any other application where low power consumption and reduced size are a must. Newer generation accelerometers are also a step forward in miniaturization, with some sized 2x2x1 mm. some are available with both 14 and 12-lead pinout.
Uses for these accelerometers include: Telematics and black boxes, in-dash car navigations, inclination measurement, anti-theft devices, intelligent power saving, vibration monitoring and compensation and motion activated functions.
With this range of accelerometers being capable to be used in the automotive industry (except stock no. 111-6447) such as AIS32x family, they have an extended temperature range and AEC-Q100 qualified.
Accelerometers, STMicroelectronics
Note
The stock no. 111-6447 is not intended for Automotive Safety Applications.